Hi Ilias,
On 7/29/24 14:29, Ilias Apalodimas wrote:
> Hi Jerome,
>
> On Thu, 25 Jul 2024 at 15:59, Jerome Forissier
> <jerome.foriss...@linaro.org> wrote:
>>
>> Add support for setting the TFTP block size. The default value (1468)
>> is fine for Ethernet and allows a better throughput than the TFTP
>> default (512), if the server supports the blksize option of course.
>>
>> I tested this change with qemu_arm64_lwip_defconfig. The throughput is
>> now 875 KiB/s vs. 313 KiB/s before. That is still a low number, but I
>> think we can't expect more without implementing the windowsize option.
>>
>> Signed-off-by: Jerome Forissier <jerome.foriss...@linaro.org>
>> ---
>> net/Kconfig | 20 ++++++++++----------
>> net/lwip/tftp.c | 2 ++
>> 2 files changed, 12 insertions(+), 10 deletions(-)
>>
>> diff --git a/net/Kconfig b/net/Kconfig
>> index 952690d677d..7e5406bb923 100644
>> --- a/net/Kconfig
>> +++ b/net/Kconfig
>> @@ -69,16 +69,6 @@ config SYS_FAULT_ECHO_LINK_DOWN
>> this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to
>> be configured.
>>
>> -config TFTP_BLOCKSIZE
>> - int "TFTP block size"
>> - default 1468
>> - help
>> - Default TFTP block size.
>> - The MTU is typically 1500 for ethernet, so a TFTP block of
>> - 1468 (MTU minus eth.hdrs) provides a good throughput with
>> - almost-MTU block sizes.
>> - You can also activate CONFIG_IP_DEFRAG to set a larger block.
>> -
>
> Why do you have to move the config option?
It is moved from the 'if NET' block to the 'if NET || NET_LWIP' block since
it now applies to both.
Thanks,
--
Jerome
>
> Cheers
> /Ilias
>> config TFTP_PORT
>> bool "Set TFTP UDP source/destination ports via the environment"
>> help
>> @@ -263,4 +253,14 @@ config SYS_RX_ETH_BUFFER
>> since all buffers can be full shortly after enabling the interface
>> on
>> high Ethernet traffic.
>>
>> +config TFTP_BLOCKSIZE
>> + int "TFTP block size"
>> + default 1468
>> + help
>> + Default TFTP block size.
>> + The MTU is typically 1500 for ethernet, so a TFTP block of
>> + 1468 (MTU minus eth.hdrs) provides a good throughput with
>> + almost-MTU block sizes.
>> + You can also activate CONFIG_IP_DEFRAG to set a larger block.
>> +
>> endif # if NET || NET_LWIP
>> diff --git a/net/lwip/tftp.c b/net/lwip/tftp.c
>> index 78de0bd0dba..1fe948c84ec 100644
>> --- a/net/lwip/tftp.c
>> +++ b/net/lwip/tftp.c
>> @@ -136,6 +136,8 @@ static int tftp_loop(struct udevice *udev, ulong addr,
>> char *fname,
>> if (!(err == ERR_OK || err == ERR_USE))
>> log_err("tftp_init_client err: %d\n", err);
>>
>> + tftp_client_set_blksize(CONFIG_TFTP_BLOCKSIZE);
>> +
>> ctx.start_time = get_timer(0);
>> err = tftp_get(&ctx, &srvip, srvport, fname, TFTP_MODE_OCTET);
>> /* might return different errors, like routing problems */
>> --
>> 2.40.1
>>
