These board has not been converted to CONFIG_DM_I2C by the deadline:
pg_wcom_expu1
pg_wcom_expu1_update
pg_wcom_seli8
pg_wcom_seli8_update
Remove them.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/dts/ls1021a-pg-wcom-expu1.dts | 141 -----------
arch/arm/dts/ls1021a-pg-wcom-seli8.dts | 124 ----------
board/keymile/Kconfig | 1 -
board/keymile/pg-wcom-ls102xa/Kconfig | 39 ----
board/keymile/pg-wcom-ls102xa/MAINTAINERS | 16 --
board/keymile/pg-wcom-ls102xa/Makefile | 11 -
board/keymile/pg-wcom-ls102xa/ddr.c | 91 --------
.../keymile/pg-wcom-ls102xa/pg-wcom-expu1.env | 3 -
.../keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c | 218 ------------------
.../keymile/pg-wcom-ls102xa/pg-wcom-seli8.env | 3 -
configs/pg_wcom_expu1_defconfig | 109 ---------
configs/pg_wcom_expu1_update_defconfig | 107 ---------
configs/pg_wcom_seli8_defconfig | 109 ---------
configs/pg_wcom_seli8_update_defconfig | 107 ---------
include/configs/km/pg-wcom-ls102xa.h | 167 --------------
include/configs/pg-wcom-expu1.h | 49 ----
include/configs/pg-wcom-seli8.h | 40 ----
17 files changed, 1335 deletions(-)
delete mode 100644 arch/arm/dts/ls1021a-pg-wcom-expu1.dts
delete mode 100644 arch/arm/dts/ls1021a-pg-wcom-seli8.dts
delete mode 100644 board/keymile/pg-wcom-ls102xa/Kconfig
delete mode 100644 board/keymile/pg-wcom-ls102xa/MAINTAINERS
delete mode 100644 board/keymile/pg-wcom-ls102xa/Makefile
delete mode 100644 board/keymile/pg-wcom-ls102xa/ddr.c
delete mode 100644 board/keymile/pg-wcom-ls102xa/pg-wcom-expu1.env
delete mode 100644 board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
delete mode 100644 board/keymile/pg-wcom-ls102xa/pg-wcom-seli8.env
delete mode 100644 configs/pg_wcom_expu1_defconfig
delete mode 100644 configs/pg_wcom_expu1_update_defconfig
delete mode 100644 configs/pg_wcom_seli8_defconfig
delete mode 100644 configs/pg_wcom_seli8_update_defconfig
delete mode 100644 include/configs/km/pg-wcom-ls102xa.h
delete mode 100644 include/configs/pg-wcom-expu1.h
delete mode 100644 include/configs/pg-wcom-seli8.h
diff --git a/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
b/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
deleted file mode 100644
index ec8e7dee271..00000000000
--- a/arch/arm/dts/ls1021a-pg-wcom-expu1.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Hitachi ABB Power Grids EXPU1 board device tree source
- *
- * Copyright 2020 Hitachi ABB Power Grids
- *
- * Copyright 2013-2015 Freescale Semiconductor, Inc.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
- model = "EXPU1 Service Unit for XMC and FOX";
-
- aliases {
- enet2-rgmii-debug-phy = &debug_phy;
- };
-
- chosen {
- stdout-path = &uart0;
- };
-};
-
-&enet0 {
- status = "okay";
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&enet1 {
- status = "okay";
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&enet2 {
- phy-handle = <&debug_phy>;
- phy-connection-type = "rgmii-id";
- max-speed = <100>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&dspi1 {
- bus-num = <0>;
- status = "okay";
- zl30343@0 {
- compatible = "gen,spidev", "zarlink,zl30343";
- reg = <0>;
- spi-max-frequency = <8000000>;
- };
-};
-
-&ifc {
- #address-cells = <2>;
- #size-cells = <1>;
- /* NOR Flash on board */
- ranges = <0x0 0x0 0x60000000 0x04000000>;
- status = "okay";
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x4000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- label = "rcw";
- reg = <0x0 0x20000>;
- read-only;
- };
- partition@20000 {
- label = "qe";
- reg = <0x20000 0x20000>;
- };
- partition@40000 {
- label = "envred";
- reg = <0x40000 0x20000>;
- };
- partition@60000 {
- label = "env";
- reg = <0x60000 0x20000>;
- };
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>;
- };
- partition@200000 {
- label = "redenvred";
- reg = <0x200000 0x20000>;
- };
- partition@220000 {
- label = "redenv";
- reg = <0x220000 0x20000>;
- };
- partition@240000 {
- label = "redu-boot";
- reg = <0x240000 0x100000>;
- };
- partition@340000 {
- label = "ubi0";
- reg = <0x340000 0x03C00000>;
- };
- };
-};
-
-&mdio0 {
- debug_phy: ethernet-phy@11 {
- reg = <0x11>;
- };
-
- tbi0: tbi-phy@0xb {
- reg = <0xb>;
- device_type = "tbi-phy";
- };
-};
-
-&mdio1 {
- tbi1: tbi-phy@0xd {
- reg = <0xd>;
- device_type = "tbi-phy";
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
b/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
deleted file mode 100644
index 03ce3ab4e47..00000000000
--- a/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013-2015 Freescale Semiconductor, Inc.
- * Copyright 2020 Hitachi Power Grids. All rights reserved.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
- model = "Hitachi-Powergrids SELI8 Service Unit for XMC and FOX";
-
- chosen {
- stdout-path = &uart0;
- };
-};
-
-&enet0 {
- status = "okay";
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&enet1 {
- status = "okay";
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&enet2 {
- phy-handle = <&debug_phy>;
- phy-connection-type = "rgmii-id";
- max-speed = <100>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&ifc {
- #address-cells = <2>;
- #size-cells = <1>;
- /* NOR Flash on board */
- ranges = <0x0 0x0 0x60000000 0x04000000>;
- status = "okay";
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x4000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- label = "rcw";
- reg = <0x0 0x20000>;
- read-only;
- };
- partition@20000 {
- label = "qe";
- reg = <0x20000 0x20000>;
- };
- partition@40000 {
- label = "envred";
- reg = <0x40000 0x20000>;
- };
- partition@60000 {
- label = "env";
- reg = <0x60000 0x20000>;
- };
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>;
- };
- partition@200000 {
- label = "redenvred";
- reg = <0x200000 0x20000>;
- };
- partition@220000 {
- label = "redenv";
- reg = <0x220000 0x20000>;
- };
- partition@240000 {
- label = "redu-boot";
- reg = <0x240000 0x100000>;
- };
- partition@340000 {
- label = "ubi0";
- reg = <0x340000 0x03C00000>;
- };
- };
-};
-
-&mdio0 {
- debug_phy: ethernet-phy@11 {
- reg = <0x11>;
- };
-
- tbi0: tbi-phy@0xb {
- reg = <0xb>;
- device_type = "tbi-phy";
- };
-};
-
-&mdio1 {
- tbi1: tbi-phy@0xd {
- reg = <0xd>;
- device_type = "tbi-phy";
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index f7e9b74f578..18ef689b334 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -154,7 +154,6 @@ config PG_WCOM_UBOOT_UPDATE
source "board/keymile/km83xx/Kconfig"
source "board/keymile/kmcent2/Kconfig"
-source "board/keymile/pg-wcom-ls102xa/Kconfig"
endmenu
diff --git a/board/keymile/pg-wcom-ls102xa/Kconfig
b/board/keymile/pg-wcom-ls102xa/Kconfig
deleted file mode 100644
index f0b5ceabb69..00000000000
--- a/board/keymile/pg-wcom-ls102xa/Kconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-if TARGET_PG_WCOM_SELI8
-
-config SYS_BOARD
- default "pg-wcom-ls102xa"
-
-config SYS_VENDOR
- default "keymile"
-
-config SYS_SOC
- default "ls102xa"
-
-config SYS_CONFIG_NAME
- default "pg-wcom-seli8"
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- imply FS_CRAMFS
-
-endif
-
-if TARGET_PG_WCOM_EXPU1
-
-config SYS_BOARD
- default "pg-wcom-ls102xa"
-
-config SYS_VENDOR
- default "keymile"
-
-config SYS_SOC
- default "ls102xa"
-
-config SYS_CONFIG_NAME
- default "pg-wcom-expu1"
-
-config BOARD_SPECIFIC_OPTIONS
- def_bool y
- imply FS_CRAMFS
-
-endif
diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS
b/board/keymile/pg-wcom-ls102xa/MAINTAINERS
deleted file mode 100644
index ed5baf269a7..00000000000
--- a/board/keymile/pg-wcom-ls102xa/MAINTAINERS
+++ /dev/null
@@ -1,16 +0,0 @@
-Hitachi Power Grids LS102XA BOARD
-M: Aleksandar Gerasimovski <aleksandar.gerasimov...@hitachienergy.com>
-M: Rainer Boschung <rainer.bosch...@hitachienergy.com>
-S: Maintained
-F: board/keymile/pg-wcom-ls102xa/
-F: board/keymile/common/
-F: board/keymile/scripts/
-F: include/configs/km/pg-wcom-ls102xa.h
-F: include/configs/pg-wcom-seli8.h
-F: include/configs/pg-wcom-expu1.h
-F: configs/pg_wcom_seli8_defconfig
-F: configs/pg_wcom_seli8_update_defconfig
-F: configs/pg_wcom_expu1_defconfig
-F: configs/pg_wcom_expu1_update_defconfig
-F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts
-F: arch/arm/dts/ls1021a-pg-wcom-expu1.dts
diff --git a/board/keymile/pg-wcom-ls102xa/Makefile
b/board/keymile/pg-wcom-ls102xa/Makefile
deleted file mode 100644
index 229b0c28278..00000000000
--- a/board/keymile/pg-wcom-ls102xa/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2021 Hitachi Power Grids. All rights reserved.
-#
-
-obj-y += pg-wcom-ls102xa.o ddr.o
-obj-y += ../common/common.o ../common/ivm.o ../common/qrio.o
-obj-$(CONFIG_LAYERSCAPE_NS_ACCESS) += ../../freescale/common/ns_access.o
-obj-$(CONFIG_LS102XA_STREAM_ID) += ../../freescale/common/ls102xa_stream_id.o
-obj-$(CONFIG_ID_EEPROM) += ../../freescale/common/sys_eeprom.o
diff --git a/board/keymile/pg-wcom-ls102xa/ddr.c
b/board/keymile/pg-wcom-ls102xa/ddr.c
deleted file mode 100644
index 51938a1b4d8..00000000000
--- a/board/keymile/pg-wcom-ls102xa/ddr.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 Hitachi Power Grids. All rights reserved.
- */
-
-#include <config.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/global_data.h>
-#include <asm/arch/ls102xa_soc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- if (ctrl_num > 1) {
- printf("Not supported controller number %d\n", ctrl_num);
- return;
- }
-
- // 1/2 DRAM cycle (should be increased in case of ADDR/CMD heavily
loaded than the clock)
- popts->clk_adjust = 0x4;
- popts->write_data_delay = 0x4;
- // wr leveling start value for lane 0
- popts->wrlvl_start = 0x5;
- // wr leveling start values for lanes 1-3 (lane 4 not there)
- popts->wrlvl_ctl_2 = 0x05050500;
- // 32-bit DRAM, no need to set start values for lanes we do not have
(5-8)
- popts->wrlvl_ctl_3 = 0x0;
- popts->cpo_override = 0x1f;
-
- /* force DDR bus width to 32 bits */
- popts->data_bus_width = 1;
- popts->otf_burst_chop_en = 0;
- popts->burst_length = DDR_BL8;
-
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 1;
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * Rtt and Rtt_WR override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
- popts->cswl_override = DDR_CSWL_CS0;
-
- /* optimize cpo for erratum A-009942 */
- popts->cpo_sample = 0x58;
-
- /* DHC_EN =1, ODT = 75 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-}
-
-int fsl_initdram(void)
-{
- phys_size_t dram_size;
-
- puts("Initializing DDR....using SPD\n");
- dram_size = fsl_ddr_sdram();
-
- erratum_a008850_post();
-
- gd->ram_size = dram_size;
-
- return 0;
-}
-
-int dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
- gd->bd->bi_dram[0].size = gd->ram_size;
-
- return 0;
-}
diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-expu1.env
b/board/keymile/pg-wcom-ls102xa/pg-wcom-expu1.env
deleted file mode 100644
index 1054dbf9f54..00000000000
--- a/board/keymile/pg-wcom-ls102xa/pg-wcom-expu1.env
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <env/pg-wcom/ls102xa.env>
-
-hostname=EXPU1
diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
deleted file mode 100644
index cc3611e2dec..00000000000
--- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Hitachi Power Grids. All rights reserved.
- */
-
-#include <config.h>
-#include <event.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/immap_ls102xa.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_devdis.h>
-#include <asm/arch/ls102xa_soc.h>
-#include <hwconfig.h>
-#include <mmc.h>
-#include <fsl_csu.h>
-#include <fsl_esdhc.h>
-#include <fsl_ifc.h>
-#include <fsl_immap.h>
-#include <netdev.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <fsl_sec.h>
-#include <fsl_devdis.h>
-#include <fsl_ddr.h>
-#include <spl.h>
-#include <fdt_support.h>
-#include <fsl_qe.h>
-#include <fsl_validate.h>
-
-#include "../common/common.h"
-#include "../common/qrio.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
-
-int checkboard(void)
-{
- show_qrio();
-
- return 0;
-}
-
-int dram_init(void)
-{
- return fsl_initdram();
-}
-
-int board_early_init_f(void)
-{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL};
-
- /* Disable unused MCK1 */
- setbits_be32(&gur->ddrclkdr, 2);
-
- /* IFC Global Configuration */
- setbits_be32(&ifc.gregs->ifc_gcr, 12 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
- setbits_be32(&ifc.gregs->ifc_ccr, IFC_CCR_CLK_DIV(3) |
- IFC_CCR_INV_CLK_EN);
-
- /* clear BD & FR bits for BE BD's and frame data */
- clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
- out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
-
- init_early_memctl_regs();
-
- /* QRIO Configuration */
- qrio_uprstreq(UPREQ_CORE_RST);
-
-#if IS_ENABLED(CONFIG_TARGET_PG_WCOM_SELI8)
- qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(KM_LIU_RST, true);
-
- qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(KM_PAXK_RST, true);
-#endif
-
-#if IS_ENABLED(CONFIG_TARGET_PG_WCOM_EXPU1)
- qrio_prstcfg(WCOM_TMG_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(WCOM_TMG_RST, true);
-
- qrio_prstcfg(WCOM_PHY_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_prst(WCOM_PHY_RST, false, false);
-
- qrio_prstcfg(WCOM_QSFP_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_wdmask(WCOM_QSFP_RST, true);
-
- qrio_prstcfg(WCOM_CLIPS_RST, PRSTCFG_POWUP_UNIT_RST);
- qrio_prst(WCOM_CLIPS_RST, false, false);
-#endif
-
- /* deasset debug phy reset only if piggy is present */
- qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
- qrio_prst(KM_DBG_ETH_RST, !qrio_get_pgy_pres_pin(), false);
-
- i2c_deblock_gpio_cfg();
-
- /* enable the Unit LED (red) & Boot LED (on) */
- qrio_set_leds();
-
- /* enable Application Buffer */
- qrio_enable_app_buffer();
-
- arch_soc_init();
-
- return 0;
-}
-
-static int pg_wcom_misc_init_f(void)
-{
- if (IS_ENABLED(CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED))
- check_for_uboot_update();
-
- return 0;
-}
-EVENT_SPY_SIMPLE(EVT_MISC_INIT_F, pg_wcom_misc_init_f);
-
-int board_init(void)
-{
- if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_A010315))
- erratum_a010315();
-
- fsl_serdes_init();
-
- ls102xa_smmu_stream_id_init();
-
- u_qe_init();
-
- return 0;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
-int misc_init_r(void)
-{
- device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl));
-
- ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
- CONFIG_PIGGY_MAC_ADDRESS_OFFSET);
-
- return 0;
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-
- if (IS_ENABLED(CONFIG_PCI))
- ft_pci_setup(blob, bd);
-
- return 0;
-}
-
-#if defined(CONFIG_POST)
-int post_hotkeys_pressed(void)
-{
- /* DIC26_SELFTEST: QRIO, SLFTEST */
- return qrio_get_selftest_pin();
-}
-
-/* POST word is located in the unused SCRATCHRW4 register */
-#define CCSR_SCRATCHRW4_ADDR 0x1ee020c
-
-ulong post_word_load(void)
-{
- void *addr = (void *)CCSR_SCRATCHRW4_ADDR;
- return in_le32(addr);
-}
-
-void post_word_store(ulong value)
-{
- void *addr = (void *)CCSR_SCRATCHRW4_ADDR;
- out_le32(addr, value);
-}
-
-int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
-{
- /* Define only 1MiB range for mem_regions at the middle of the RAM */
- /* For 1GiB range mem_regions takes approx. 4min */
- *vstart = CFG_SYS_SDRAM_BASE + (gd->ram_size >> 1);
- *size = 1 << 20;
- return 0;
-}
-#endif
-
-u8 flash_read8(void *addr)
-{
- return __raw_readb(addr + 1);
-}
-
-void flash_write16(u16 val, void *addr)
-{
- u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
-
- __raw_writew(shftval, addr);
-}
-
-u16 flash_read16(void *addr)
-{
- u16 val = __raw_readw(addr);
-
- return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
-}
-
-int hush_init_var(void)
-{
- ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
- return 0;
-}
-
-EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, set_km_env);
diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-seli8.env
b/board/keymile/pg-wcom-ls102xa/pg-wcom-seli8.env
deleted file mode 100644
index 1232fe9da8b..00000000000
--- a/board/keymile/pg-wcom-ls102xa/pg-wcom-seli8.env
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <env/pg-wcom/ls102xa.env>
-
-hostname=SELI8
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
deleted file mode 100644
index 61513c9e2ec..00000000000
--- a/configs/pg_wcom_expu1_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=8333333
-CONFIG_TARGET_PG_WCOM_EXPU1=y
-CONFIG_TEXT_BASE=0x60100000
-CONFIG_SYS_MALLOC_LEN=0x1004000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SOURCE_FILE="pg-wcom-expu1"
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-CONFIG_SYS_CLK_FREQ=66666666
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
-CONFIG_ENV_ADDR=0x60060000
-# CONFIG_DEEP_SLEEP is not set
-CONFIG_LAYERSCAPE_NS_ACCESS=y
-CONFIG_KM_COMMON_ETH_INIT=y
-CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
-CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
-CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y
-CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
-CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_SILENT_CONSOLE=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_CRAMFS=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR_REDUND=0x60040000
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="ethernet@2d90000"
-CONFIG_USE_HOSTNAME=y
-CONFIG_HOSTNAME="EXPU1"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SCSI_AHCI is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_DDR_CLK_FREQ=50000000
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_SYS_I2C_LEGACY=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_IFC=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_FIXED=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FW_ADDR=0x60020000
-# CONFIG_SCSI is not set
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_expu1_update_defconfig
b/configs/pg_wcom_expu1_update_defconfig
deleted file mode 100644
index ec0f975ae36..00000000000
--- a/configs/pg_wcom_expu1_update_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=8333333
-CONFIG_TARGET_PG_WCOM_EXPU1=y
-CONFIG_TEXT_BASE=0x60240000
-CONFIG_SYS_MALLOC_LEN=0x1004000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SOURCE_FILE="pg-wcom-expu1"
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
-CONFIG_ENV_ADDR=0x60220000
-# CONFIG_DEEP_SLEEP is not set
-CONFIG_LAYERSCAPE_NS_ACCESS=y
-CONFIG_KM_COMMON_ETH_INIT=y
-CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
-CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
-CONFIG_PG_WCOM_UBOOT_UPDATE=y
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
-CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_SILENT_CONSOLE=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_CRAMFS=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR_REDUND=0x60200000
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="ethernet@2d90000"
-CONFIG_USE_HOSTNAME=y
-CONFIG_HOSTNAME="EXPU1"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SCSI_AHCI is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_DDR_CLK_FREQ=50000000
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_SYS_I2C_LEGACY=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_IFC=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_FIXED=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FW_ADDR=0x60020000
-# CONFIG_SCSI is not set
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
deleted file mode 100644
index 82923d32ca6..00000000000
--- a/configs/pg_wcom_seli8_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=8333333
-CONFIG_TARGET_PG_WCOM_SELI8=y
-CONFIG_TEXT_BASE=0x60100000
-CONFIG_SYS_MALLOC_LEN=0x1004000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SOURCE_FILE="pg-wcom-seli8"
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-CONFIG_SYS_CLK_FREQ=66666666
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
-CONFIG_ENV_ADDR=0x60060000
-# CONFIG_DEEP_SLEEP is not set
-CONFIG_LAYERSCAPE_NS_ACCESS=y
-CONFIG_KM_COMMON_ETH_INIT=y
-CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
-CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
-CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y
-CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
-CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_SILENT_CONSOLE=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_CRAMFS=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR_REDUND=0x60040000
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="ethernet@2d90000"
-CONFIG_USE_HOSTNAME=y
-CONFIG_HOSTNAME="SELI8"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SCSI_AHCI is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_DDR_CLK_FREQ=50000000
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_SYS_I2C_LEGACY=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_IFC=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_FIXED=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FW_ADDR=0x60020000
-# CONFIG_SCSI is not set
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_seli8_update_defconfig
b/configs/pg_wcom_seli8_update_defconfig
deleted file mode 100644
index 41931e24768..00000000000
--- a/configs/pg_wcom_seli8_update_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=8333333
-CONFIG_TARGET_PG_WCOM_SELI8=y
-CONFIG_TEXT_BASE=0x60240000
-CONFIG_SYS_MALLOC_LEN=0x1004000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SOURCE_FILE="pg-wcom-seli8"
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
-CONFIG_SYS_MONITOR_LEN=1048576
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
-CONFIG_ENV_ADDR=0x60220000
-# CONFIG_DEEP_SLEEP is not set
-CONFIG_LAYERSCAPE_NS_ACCESS=y
-CONFIG_KM_COMMON_ETH_INIT=y
-CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
-CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
-CONFIG_PG_WCOM_UBOOT_UPDATE=y
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
-CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_SILENT_CONSOLE=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MAXARGS=32
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_LOADS_ECHO=y
-CONFIG_SYS_LOADS_BAUD_CHANGE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_BOOTP_BOOTFILESIZE=y
-CONFIG_CMD_CRAMFS=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR_REDUND=0x60200000
-CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="ethernet@2d90000"
-CONFIG_USE_HOSTNAME=y
-CONFIG_HOSTNAME="SELI8"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SCSI_AHCI is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_DDR_CLK_FREQ=50000000
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_SYS_I2C_LEGACY=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_EMPTY_INFO=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_FLASH_QUIET_TEST=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_FSL_IFC=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_FIXED=y
-CONFIG_DM_MDIO=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FW_ADDR=0x60020000
-# CONFIG_SCSI is not set
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/include/configs/km/pg-wcom-ls102xa.h
b/include/configs/km/pg-wcom-ls102xa.h
deleted file mode 100644
index 15ef68a0507..00000000000
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Hitachi Power Grids. All rights reserved.
- */
-
-#ifndef __CONFIG_PG_WCOM_LS102XA_H
-#define __CONFIG_PG_WCOM_LS102XA_H
-
-#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
-#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE
-
-#define CFG_PRAM ((CONFIG_KM_PNVRAM + \
- CONFIG_KM_PHRAM + \
- CONFIG_KM_RESERVED_PRAM) >> 10)
-
-#define PHYS_SDRAM 0x80000000
-#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
-
-#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
-#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
-
-#define SPD_EEPROM_ADDRESS 0x54
-
-/* POST memory regions test */
-#define CFG_POST (CFG_SYS_POST_MEM_REGIONS)
-#define CFG_POST_EXTERNAL_WORD_FUNCS
-
-/*
- * IFC Definitions
- */
-/* NOR Flash Definitions */
-#define CFG_SYS_FLASH_BASE 0x60000000
-#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
-
-#define CFG_SYS_NOR0_CSPR_EXT (0x0)
-#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_TE | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CFG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024)
-
-#define CFG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | \
- CSOR_NOR_ADM_SHIFT(0x4) | \
- CSOR_NOR_NOR_MODE_ASYNC_NOR | \
- CSOR_NOR_TRHZ_20 | \
- CSOR_NOR_BCTLD)
-#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
- FTIM0_NOR_TEADC(0x7) | \
- FTIM0_NOR_TAVDS(0x0) | \
- FTIM0_NOR_TEAHC(0x1))
-#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
- FTIM1_NOR_TRAD_NOR(0x21) | \
- FTIM1_NOR_TSEQRAD_NOR(0x21))
-#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) | \
- FTIM2_NOR_TCH(0x1) | \
- FTIM2_NOR_TWPH(0x6) | \
- FTIM2_NOR_TWP(0xb))
-#define CFG_SYS_NOR_FTIM3 0
-
-#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS }
-
-#define CFG_SYS_WRITE_SWAPPED_DATA
-
-#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT
-#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR
-#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
-#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
-#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
-#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
-#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
-#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
-
-/* NAND Flash Definitions */
-#define CFG_SYS_NAND_BASE 0x68000000
-#define CFG_SYS_NAND_BASE_PHYS CFG_SYS_NAND_BASE
-
-#define CFG_SYS_NAND_CSPR_EXT (0x0)
-#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE) | \
- CSPR_PORT_SIZE_8 | \
- CSPR_TE | \
- CSPR_MSEL_NAND | \
- CSPR_V)
-#define CFG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
-#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN \
- | CSOR_NAND_ECC_DEC_EN \
- | CSOR_NAND_ECC_MODE_4 \
- | CSOR_NAND_RAL_3 \
- | CSOR_NAND_PGS_2K \
- | CSOR_NAND_SPRZ_64 \
- | CSOR_NAND_PB(64) \
- | CSOR_NAND_TRHZ_40 \
- | CSOR_NAND_BCTLD)
-
-#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \
- FTIM0_NAND_TWP(0x8) | \
- FTIM0_NAND_TWCHT(0x3) | \
- FTIM0_NAND_TWH(0x5))
-#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \
- FTIM1_NAND_TWBE(0x1e) | \
- FTIM1_NAND_TRR(0x6) | \
- FTIM1_NAND_TRP(0x8))
-#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \
- FTIM2_NAND_TREH(0x5) | \
- FTIM2_NAND_TWHRE(0x3c))
-#define CFG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e))
-
-#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT
-#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
-#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
-#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
-#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
-#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
-#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
-#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
-
-#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
-
-/* QRIO FPGA Definitions */
-#define CFG_SYS_QRIO_BASE 0x70000000
-#define CFG_SYS_QRIO_BASE_PHYS CFG_SYS_QRIO_BASE
-
-#define CFG_SYS_CSPR2_EXT (0x00)
-#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_QRIO_BASE) | \
- CSPR_PORT_SIZE_8 | \
- CSPR_TE | \
- CSPR_MSEL_GPCM | \
- CSPR_V)
-#define CFG_SYS_AMASK2 IFC_AMASK(64 * 1024)
-#define CFG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) | \
- CSOR_GPCM_TRHZ_20 | \
- CSOR_GPCM_BCTLD)
-#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \
- FTIM0_GPCM_TEADC(0x8) | \
- FTIM0_GPCM_TEAHC(0x2))
-#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
- FTIM1_GPCM_TRAD(0x6))
-#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) | \
- FTIM2_GPCM_TCH(0x1) | \
- FTIM2_GPCM_TWP(0x7))
-#define CFG_SYS_CS2_FTIM3 0x04000000
-
-/*
- * Serial Port
- */
-#define CFG_SYS_NS16550_CLK get_serial_clock()
-
-/*
- * I2C
- */
-
-#define CFG_SYS_I2C_MAX_HOPS 1
-#define CFG_SYS_NUM_I2C_BUSES 3
-#define I2C_MUX_PCA_ADDR 0x70
-#define I2C_MUX_CH_DEFAULT 0x0
-#define CFG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
- {1, {I2C_NULL_HOP} }, \
- }
-
-#define CFG_SMP_PEN_ADDR 0x01ee0200
-
-#define HWCONFIG_BUFFER_SIZE 256
-
-#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */
-
-#endif
diff --git a/include/configs/pg-wcom-expu1.h b/include/configs/pg-wcom-expu1.h
deleted file mode 100644
index 2c38cffa8a0..00000000000
--- a/include/configs/pg-wcom-expu1.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Hitachi ABB Power Grids
- */
-
-#ifndef __CONFIG_PG_WCOM_EXPU1_H
-#define __CONFIG_PG_WCOM_EXPU1_H
-
-#define WCOM_EXPU1
-
-/* CLIPS FPGA Definitions */
-#define CFG_SYS_CSPR3_EXT (0x00)
-#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \
- CSPR_PORT_SIZE_8 | \
- CSPR_MSEL_GPCM | \
- CSPR_V)
-#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024)
-#define CFG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \
- CSOR_GPCM_TRHZ_40)
-#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
- FTIM0_GPCM_TEADC(0x7) | \
- FTIM0_GPCM_TEAHC(0x2))
-#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
- FTIM1_GPCM_TRAD(0x12))
-#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
- FTIM2_GPCM_TCH(0x1) | \
- FTIM2_GPCM_TWP(0x12))
-#define CFG_SYS_CS3_FTIM3 0x04000000
-
-/* PRST */
-#define WCOM_CLIPS_RST 0
-#define WCOM_QSFP_RST 1
-#define WCOM_PHY_RST 2
-#define WCOM_TMG_RST 3
-#define KM_DBG_ETH_RST 15
-
-/* QRIO GPIOs used for deblocking */
-#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A
-#define KM_I2C_DEBLOCK_SCL 20
-#define KM_I2C_DEBLOCK_SDA 21
-
-/* ZL30343 on SPI */
-#define WCOM_ZL30343_CFG_ADDR 0xe8070000
-#define WCOM_ZL30343_SPI_BUS 0
-#define WCOM_ZL30343_CS 0
-
-#include "km/pg-wcom-ls102xa.h"
-
-#endif /* __CONFIG_PG_WCOM_EXPU1_H */
diff --git a/include/configs/pg-wcom-seli8.h b/include/configs/pg-wcom-seli8.h
deleted file mode 100644
index 9474d3bd7bd..00000000000
--- a/include/configs/pg-wcom-seli8.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Hitachi Power Grids. All rights reserved.
- */
-
-#ifndef __CONFIG_PG_WCOM_SELI8_H
-#define __CONFIG_PG_WCOM_SELI8_H
-
-/* PAXK FPGA Definitions */
-#define CFG_SYS_CSPR3_EXT (0x00)
-#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \
- CSPR_PORT_SIZE_8 | \
- CSPR_MSEL_GPCM | \
- CSPR_V)
-#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024)
-#define CFG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \
- CSOR_GPCM_TRHZ_40)
-#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
- FTIM0_GPCM_TEADC(0x7) | \
- FTIM0_GPCM_TEAHC(0x2))
-#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
- FTIM1_GPCM_TRAD(0x12))
-#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
- FTIM2_GPCM_TCH(0x1) | \
- FTIM2_GPCM_TWP(0x12))
-#define CFG_SYS_CS3_FTIM3 0x04000000
-
-/* PRST */
-#define KM_LIU_RST 0
-#define KM_PAXK_RST 1
-#define KM_DBG_ETH_RST 15
-
-/* QRIO GPIOs used for deblocking */
-#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A
-#define KM_I2C_DEBLOCK_SCL 20
-#define KM_I2C_DEBLOCK_SDA 21
-
-#include "km/pg-wcom-ls102xa.h"
-
-#endif /* __CONFIG_PG_WCOM_SELI8_H */
--
2.34.1
