Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu <seashell11234...@gmail.com>
---
(no changes since v1)
doc/board/index.rst | 1 +
doc/board/spacemit/bananapi_f3.rst | 78 ++++++++++++++++++++++++++++++
doc/board/spacemit/index.rst | 8 +++
3 files changed, 87 insertions(+)
create mode 100644 doc/board/spacemit/bananapi_f3.rst
create mode 100644 doc/board/spacemit/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 417c128c7a..367da2d623 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -51,6 +51,7 @@ Board-specific doc
sipeed/index
socionext/index
sophgo/index
+ spacemit/index
st/index
starfive/index
ste/index
diff --git a/doc/board/spacemit/bananapi_f3.rst
b/doc/board/spacemit/bananapi_f3.rst
new file mode 100644
index 0000000000..cf3041085f
--- /dev/null
+++ b/doc/board/spacemit/bananapi_f3.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Banana Pi F3
+============
+
+About This
+----------
+Banana Pi F3 board is a industrial grade RISC-V development board, it
+design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI
+computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB
+3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
+
+Building
+~~~~~~~~
+1. Add the RISC-V toolchain to your PATH.
+2. Setup ARCH & cross compilation environment variable:
+
+.. code-block:: console
+
+ export CROSS_COMPILE=<riscv64 toolchain prefix>
+
+3. Before building U-Boot, OpenSBI should be built first. OpenSBI can be
+built for SpacemiT K1 SoC as below:
+
+.. code-block:: console
+
+ git clone https://github.com/cyyself/opensbi -b k1-opensbi
+ cd opensbi
+ make PLATFORM=generic
+
+4. Then build U-Boot as following:
+
+.. code-block:: console
+
+ cd <U-Boot-dir>
+ make bananapi_f3_defconfig
+ make OPENSBI=<OpenSBI-dir>/build/platform/generic/firmware/fw_dynamic.bin
+
+This will generate u-boot.itb
+
+Booting
+~~~~~~~
+Currently, we use a modified vendor's U-Boot SPL to load a FIT image that
+includes OpenSBI and U-Boot. Fully describing how to boot into U-Boot is a
+challenging task. And the booting method will be added after the SPL
+support is available.
+
+Sample boot log from Banana Pi F3 board
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. code-block:: none
+
+ U-Boot 2024.07-00686-g608f2d51760c (Jul 08 2024 - 14:53:51 +0800)
+
+ DRAM: 4 GiB
+ Core: 18 devices, 7 uclasses, devicetree: separate
+ Loading Environment from nowhere... OK
+ In: serial@d4017000
+ Out: serial@d4017000
+ Err: serial@d4017000
+ Net: No ethernet found.
+ bananapi_f3# cpu detail
+ 0: cpu@0 spacemit,x60
+ ID = 0, freq = 0 Hz: MMU
+ 1: cpu@1 spacemit,x60
+ ID = 1, freq = 0 Hz: MMU
+ 2: cpu@2 spacemit,x60
+ ID = 2, freq = 0 Hz: MMU
+ 3: cpu@3 spacemit,x60
+ ID = 3, freq = 0 Hz: MMU
+ 4: cpu@4 spacemit,x60
+ ID = 4, freq = 0 Hz: MMU
+ 5: cpu@5 spacemit,x60
+ ID = 5, freq = 0 Hz: MMU
+ 6: cpu@6 spacemit,x60
+ ID = 6, freq = 0 Hz: MMU
+ 7: cpu@7 spacemit,x60
+ ID = 7, freq = 0 Hz: MMU
+ bananapi_f3#
diff --git a/doc/board/spacemit/index.rst b/doc/board/spacemit/index.rst
new file mode 100644
index 0000000000..78081a47ff
--- /dev/null
+++ b/doc/board/spacemit/index.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+SpacemiT
+========
+.. toctree::
+ :maxdepth: 1
+
+ bananapi_f3
--
2.41.0
