From: Cliff Cai <cliff....@analog.com>
When dealing with non-multipoint devices, if the software root hub code
accepted the message, then we still need to process it normally. So only
return quickly when the root hub skipped the message or is otherwise in
an error state.
Signed-off-by: Cliff Cai <cliff....@analog.com>
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
drivers/usb/musb/musb_hcd.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 8b0c61d..974bb31 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -853,8 +853,11 @@ int submit_control_msg(struct usb_device *dev, unsigned
long pipe, void *buffer,
#ifdef MUSB_NO_MULTIPOINT
/* Control message is for the HUB? */
- if (devnum == rh_devnum)
- return musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+ if (devnum == rh_devnum) {
+ int stat = musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+ if (stat)
+ return stat;
+ }
#endif
/* select control endpoint */
--
1.7.5.rc1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
