Initialize the Cryptographic Accelerator and Assurance Module. Signed-off-by: Leonard Anderweit <l.anderw...@phytec.de> --- configs/phycore-imx8mp_defconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index e84d761aeb8c..74d381058190 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -33,6 +33,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074 +CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x26000 CONFIG_SPL_BOARD_INIT=y @@ -45,6 +46,7 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 +# CONFIG_SPL_CRYPTO is not set CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y @@ -87,6 +89,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y +CONFIG_FSL_CAAM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x42800000 CONFIG_FASTBOOT_BUF_SIZE=0x13000000 @@ -102,7 +105,6 @@ CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 CONFIG_SUPPORT_EMMC_BOOT=y @@ -152,3 +154,4 @@ CONFIG_USB_GADGET_MANUFACTURER="PHYTEC" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_IMX_WATCHDOG=y +# CONFIG_SPL_SHA_HW_ACCEL is not set -- 2.25.1
