After resetting the host controller, program in the POR val for this
register just like the Linux driver does.

This seems to help with initialization when running U-Boot as the primary
bootloader on some boards.

Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
 drivers/mmc/msm_sdhci.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 4ce0de6c47d8..8b3188fa20d4 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -31,8 +31,10 @@
 #define SDCC_MCI_STATUS2 0x6C
 #define SDCC_MCI_STATUS2_MCI_ACT 0x1
 #define SDCC_MCI_HC_MODE 0x78
 
+#define CORE_VENDOR_SPEC_POR_VAL 0xa9c
+
 struct msm_sdhc_plat {
        struct mmc_config cfg;
        struct mmc mmc;
 };
@@ -45,21 +47,25 @@ struct msm_sdhc {
 
 struct msm_sdhc_variant_info {
        bool mci_removed;
 
+       u32 core_vendor_spec;
        u32 core_vendor_spec_capabilities0;
 };
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static int msm_sdc_clk_init(struct udevice *dev)
 {
        struct msm_sdhc *prv = dev_get_priv(dev);
+       const struct msm_sdhc_variant_info *var_info;
        ofnode node = dev_ofnode(dev);
        ulong clk_rate;
        int ret, i = 0, n_clks;
        const char *clk_name;
 
+       var_info = (void *)dev_get_driver_data(dev);
+
        ret = ofnode_read_u32(node, "clock-frequency", (uint *)(&clk_rate));
        if (ret)
                clk_rate = 201500000;
 
@@ -104,8 +110,11 @@ static int msm_sdc_clk_init(struct udevice *dev)
                log_warning("Couldn't set MMC core clock rate: %dE\n", clk_rate 
? (int)PTR_ERR((void *)clk_rate) : 0);
                return -EINVAL;
        }
 
+       writel_relaxed(CORE_VENDOR_SPEC_POR_VAL,
+               prv->host.ioaddr + var_info->core_vendor_spec);
+
        return 0;
 }
 
 static int msm_sdc_mci_init(struct msm_sdhc *prv)
@@ -254,14 +263,16 @@ static int msm_sdc_bind(struct udevice *dev)
 
 static const struct msm_sdhc_variant_info msm_sdhc_mci_var = {
        .mci_removed = false,
 
+       .core_vendor_spec = 0x10c,
        .core_vendor_spec_capabilities0 = 0x11c,
 };
 
 static const struct msm_sdhc_variant_info msm_sdhc_v5_var = {
        .mci_removed = true,
 
+       .core_vendor_spec = 0x20c,
        .core_vendor_spec_capabilities0 = 0x21c,
 };
 
 static const struct udevice_id msm_mmc_ids[] = {
-- 
2.45.0

Reply via email to