δΊ 4/19/11 4:25 PM, u-boot-requ...@lists.denx.de ει: > Send U-Boot mailing list submissions to > u-boot@lists.denx.de > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.denx.de/mailman/listinfo/u-boot > or, via email, send a message with subject or body 'help' to > u-boot-requ...@lists.denx.de > > You can reach the person managing the list at > u-boot-ow...@lists.denx.de > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of U-Boot digest..." > > > Today's Topics: > > 1. [PATCH v2] S5P: GPIO Macro Values Corrected. (Chander Kashyap) > 2. Ticket number: YG764T 854R (coca-c...@une-pmta04.une.net.co) > 3. Re: [PATCH 1/2] Fix timer usage of the Atmel SPI dataflash > driver (Reinhard Meyer) > 4. Re: [PATCH 1/4] atmel_dataflash: remove use of > get_timer_masked (Reinhard Meyer) > 5. Re: [PATCH 2/3] avr32: fix linking (Reinhard Meyer) > 6. Beagle mux config: nCS5 vs. DMAREQ2? (Orjan Friberg) > 7. Re: [PATCH 1/3] ARM: don't panic if no flash is there > (Albert ARIBAUD) > 8. subscribe me to this list (Ratheendran R) > 9. Re: subscribe me to this list (Anatolij Gustschin) > 10. Re: [PATCH 00/15] [REWORK AVR32/AT91] additional changes for > avr32 (Reinhard Meyer) > 11. Re: [PATCH 00/15] [REWORK AVR32/AT91] additional changes for > avr32 (Andreas Bie?mann) > 12. [PATCH V2 01/15] avr32/config.mk: simplify PLATFORM_RELFLAGS > (Andreas Bie?mann) > 13. [PATCH V2 11/15] atngw100: move CONFIG_SYS_TEXT_BASE to > header (Andreas Bie?mann) > 14. [PATCH V2 13/15] favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to > header (Andreas Bie?mann) > 15. [PATCH V2 08/15] favr-32-ezkit: fix "#define XXXX 1" > (Andreas Bie?mann) > 16. [PATCH V2 15/15] hammerhead: move CONFIG_SYS_TEXT_BASE to > header (Andreas Bie?mann) > 17. [PATCH V2 07/15] atstk1006: fix "#define XXXX 1" > (Andreas Bie?mann) > 18. [PATCH-V2 1/2] at91: reworked support for meesc board > (Daniel Gorsulowski) > 19. [PATCH V2 09/15] hammerhead: fix "#define XXXX 1" > (Andreas Bie?mann) > 20. [PATCH V2 03/15] atngw100: fix "#define XXXX 1" (Andreas Bie?mann) > 21. [PATCH V2 00/15] *** SUBJECT HERE *** (Andreas Bie?mann) > 22. [PATCH V2 04/15] atstk1002: fix "#define XXXX 1" > (Andreas Bie?mann) > 23. [PATCH V2 10/15] mimc200: fix "#define XXXX 1" (Andreas Bie?mann) > 24. [PATCH V2 12/15] atstk100x: move CONFIG_SYS_TEXT_BASE to > header (Andreas Bie?mann) > 25. [PATCH V2 05/15] atstk1003: fix "#define XXXX 1" > (Andreas Bie?mann) > 26. [PATCH V2 06/15] atstk1004: fix "#define XXXX 1" > (Andreas Bie?mann) > 27. [PATCH V2 14/15] mimc200: move CONFIG_SYS_TEXT_BASE to header > (Andreas Bie?mann) > 28. [PATCH V2 02/15] avr32: use single linker script > (Andreas Bie?mann) > 29. [PATCH-V2 2/2] at91: reworked support for otc570 board > (Daniel Gorsulowski) > 30. Re: [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard. > (Srinath R) > 31. [PATCHv2 1/2] MMC: make b_max unconditional (John Rigby) > 32. [PATCHv2 2/2] mmc: omap_hsmmc.c: disable multiblock rw on old > rev omap34xx silicon (John Rigby) > 33. [PATCH v2 0/6] TFTP server (Luca Ceresoli) > 34. [PATCH v2 1/6] README: remove spurious line (Luca Ceresoli) > 35. [PATCH v2 2/6] NET: pass source IP address to packet handlers > (Luca Ceresoli) > 36. [PATCH v2 3/6] TFTP: rename "server" to "remote" (Luca Ceresoli) > 37. [PATCH v2 4/6] TFTP: rename STATE_RRQ to STATE_SEND_RRQ > (Luca Ceresoli) > 38. [PATCH v2 6/6] TFTP: add tftpsrv command (Luca Ceresoli) > 39. [PATCH v2 5/6] TFTP: net/tftp.c: add server mode receive > (Luca Ceresoli) > 40. [PATCH] MX31: mx31pdk: Make the board name simpler. > (Fabio Estevam) > 41. [PATCH v5] MX31: Introduce get_reset_cause() (Fabio Estevam) > 42. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address > framework to usbnet (Remy Bohmer) > 43. Loan Offer... (Norton Finance Loan) > 44. Re: [PATCH v4 1/5] Add support for SMSC95XX USB 2.0 > 10/100MBit Ethernet Adapter (Wolfgang Denk) > 45. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address > framework to usbnet (Wolfgang Denk) > 46. Re: [PATCH v4 2/5] Add Ethernet hardware MAC address > framework to usbnet (Wolfgang Denk) > 47. [PATCH] GPIO: Tegra2: add GPIO driver for Seaboard and > Harmony (Tom Warren) > 48. Re: [PATCH] BeagleBoard: Added LED driver (Paulraj, Sandeep) > 49. Re: [PATCH v3] omap3_beagle: enable the use of a plain text > file named uEnv.txt instead of boot.scr (Paulraj, Sandeep) > 50. Re: [PATCH v3] OMAP3: BeagleBoard: Enable pullups on i2c2. > (Paulraj, Sandeep) > 51. Re: [PATCH v2] OMAP3: BeagleBoard: add xM rev B to ID table > (Paulraj, Sandeep) > 52. Re: [PATCH v2] OMAP3: BeagleBoard: add more expansionboard > IDs (Paulraj, Sandeep) > 53. Re: [PATCH] BeagleBoard: add xM rev C to ID table > (Paulraj, Sandeep) > 54. Re: [Patch v1] ARMV7: AM3517/05: Add support for CraneBoard. > (Paulraj, Sandeep) > 55. Re: [PATCH 0/9] Update support for CM-T35 (Paulraj, Sandeep) > 56. ATM pin is 822 (ATM CARD DEPARTMENT) > 57. Re: [PATCH v3] omap3_beagle: enable the use of a plain text > file named uEnv.txt instead of boot.scr (Wolfgang Denk) > 58. Please pull u-boot-ti/master (s-paul...@ti.com) > 59. Re: [PATCH v3] omap3_beagle: enable the use of a plain text > file named uEnv.txt instead of boot.scr (Paulraj, Sandeep) > 60. Please pull u-boot-ti/master (s-paul...@ti.com) > 61. Fix for overlapping sections? (Ciummo, Larry (DS-1)) > 62. Re: [V1 0/3] OpenRD-Client and OpenRD-Ultimate support > (Clint Adams) > 63. [PATCH v2 0/4] support for OpenRD-Client and OpenRD-Ultimate > (Clint Adams) > 64. [PATCH v2 2/4] Add definitions for OpenRD-Client and > OpenRD-Ultimate (Clint Adams) > 65. [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and > OpenRD-Ultimate (Clint Adams) > 66. [PATCH v2 1/4] Rename openrd_base files to openrd (Clint Adams) > 67. [PATCH v2 4/4] Enable multiple fs options for Marvell SoC > family on OpenRD boards (Clint Adams) > 68. [PATCH] ehci-pci: Fix PCI EHCI driver for 36-bit (Zhao Chenhui) > 69. Re: [PATCH v2 3/4] Initialize second PHY on OpenRD-Client and > OpenRD-Ultimate (Prafulla Wadaskar) > 70. Issue with ehci-pci on MPC8548 (Sandeep Kumar Gopalpet) > 71. Re: Please pull u-boot-ti/master (Albert ARIBAUD) > 72. help for porting u-boot (Ratheendran R) > 73. PLEASE ACCEPT MY REGUEST (PLEASE ACCEPT MY REGUEST) > 74. [PATCH 0/9] Patch set for some Freescale ColdFire boards > (Jason Jin) > 75. [PATCH 1/9] Fix the configuration broken for ColdFire boards. > (Jason Jin) > 76. [PATCH V2 2/9] ColdFire: Change the way to set platform CPP > flags (Jason Jin) > 77. [PATCH V2 3/9] Env and lds file clean up for ColdFire M5445x > and M547x/8x boards. (Jason Jin) > 78. [PATCH 6/9] Disable the NFS define for 52277 board. (Jason Jin) > 79. [PATCH 4/9] Clean up lds files for some ColdFire nommu chips > (Jason Jin) > 80. [PATCH V2 5/9] Enable the dm9000 on ColdFire 5253DEMO board. > (Jason Jin) > 81. [PATCH 7/9] ColdFire:Add mb for 5253 dram initialization > (Jason Jin) > 82. [PATCH 8/9] Change the env settings for u-boot update (Jason Jin) > 83. [PATCH 9/9] sync the buffer descriptor IO for coldfire FEC > (Jason Jin) > 84. Status of ethernet support for Beagleboard xM ? (Bids O'Bids) > 85. Status of ethernet support for Beagleboard xM ? (Bids O'Bids) > 86. UEC phy not working on first try (DUNDA Matthias) > 87. [PATCH] Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE > comments (Michael Jones) > 88. Re: [PATCH] S5P:SROM config code moved to s5p-common > directory (Minkyu Kang) > 89. Re: [PATCH v2] S5P: GPIO Macro Values Corrected. (Minkyu Kang) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 18 Apr 2011 15:38:43 +0530 > From: Chander Kashyap<chander.kash...@linaro.org> > Subject: [U-Boot] [PATCH v2] S5P: GPIO Macro Values Corrected. > To: u-boot@lists.denx.de > Cc: linaro-...@lists.linaro.org, bj...@samsung.com, > patc...@linaro.org, mk7.k...@samsung.com, Chander Kashyap > <chander.kash...@linaro.org>, sams...@lists.linaro.org > Message-ID: > <1303121323-22997-1-git-send-email-chander.kash...@linaro.org> > > S5PC2XX: Macro values for Pull Up and Driver Strength were wrong. > S5PC1XX: Macro values for Driver Strength were wrong. > > Signed-off-by: Chander Kashyap<chander.kash...@linaro.org> > --- > > Changes for V2: > - Macro value order fixed. > - Added Changes for S5PC1XX. > > arch/arm/include/asm/arch-s5pc1xx/gpio.h | 4 ++-- > arch/arm/include/asm/arch-s5pc2xx/gpio.h | 7 +++---- > 2 files changed, 5 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h > b/arch/arm/include/asm/arch-s5pc1xx/gpio.h > index 2df33a6..485b9bf 100644 > --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h > +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h > @@ -149,8 +149,8 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, > int mode); > > /* Drive Strength level */ > #define GPIO_DRV_1X 0x0 > -#define GPIO_DRV_2X 0x1 > -#define GPIO_DRV_3X 0x2 > +#define GPIO_DRV_3X 0x1 > +#define GPIO_DRV_2X 0x2 > #define GPIO_DRV_4X 0x3 > #define GPIO_DRV_FAST 0x0 > #define GPIO_DRV_SLOW 0x1 > diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h > b/arch/arm/include/asm/arch-s5pc2xx/gpio.h > index 05e5b3e..38303e4 100644 > --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h > +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h > @@ -99,14 +99,13 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, > int mode); > /* Pull mode */ > #define GPIO_PULL_NONE 0x0 > #define GPIO_PULL_DOWN 0x1 > -#define GPIO_PULL_UP 0x2 > +#define GPIO_PULL_UP 0x3 > > /* Drive Strength level */ > #define GPIO_DRV_1X 0x0 > -#define GPIO_DRV_2X 0x1 > -#define GPIO_DRV_3X 0x2 > +#define GPIO_DRV_3X 0x1 > +#define GPIO_DRV_2X 0x2 > #define GPIO_DRV_4X 0x3 > #define GPIO_DRV_FAST 0x0 > #define GPIO_DRV_SLOW 0x1 > - > #endif > -- > 1.7.1 > > > > ------------------------------ > > Message: 2 > Date: Mon, 18 Apr 2011 03:18:19 -0700 > From: coca-c...@une-pmta04.une.net.co, "INC."@une-pmta04.une.net.co > Subject: [U-Boot] Ticket number: YG764T 854R > To: Recipients<coca-c...@une-pmta04.une.net.co> > Message-ID:<20110418101852.97039213...@une-pmta04.une.net.co> > Content-Type: text/plain; charset="iso-8859-1" > > COCA-COLA INC. > PO Box 1010,Great Britain. > L70 1NL,United Kingdom > > Seria No: 110922 > Ticket number: YG764T 854R > > Congratulations!!! > > Your email address has just won you the sum of ?200, 000. 00 (Great British > Pounds Sterlings) In the on going Coca-Cola Inc. Season's Promotion UK > 2011.In line with The commemorating event marking our 25th anniversary, We > rolled out over 75,000.000.00 (Seventy Five Million Great Britain Pounds) for > our 25TH Anniversary Draws you are among the 7 lucky winners. > > To claim your prize contact our Claims Department via email with Personal > details. E-mail: clearingpaymentho...@gmail.com > > 1. Scan copy of your identity Proof. > 2. Complete Names: > 3. Address: > 4. Age: > 5. Occupation: > 6. Telephone: > 7. Sex: Male > 8. Marital Status: > 9. Country: > 10: State: > > IMPORTANT:Please fill the below verification form required for authentication > and verification by the India High Commission in London: > > ANNOUNCER. > Sir Edward C. N. Branson > +44-704-579-2572 > Copyright ? Coca-Cola Inc 2011 Times Internet Limited. All rights reserved > > > ------------------------------ > > Message: 3 > Date: Mon, 18 Apr 2011 12:36:23 +0200 > From: Reinhard Meyer<u-b...@emk-elektronik.de> > Subject: Re: [U-Boot] [PATCH 1/2] Fix timer usage of the Atmel SPI > dataflash driver > To: Remy Bohmer<li...@bohmer.net> > Cc: u-boot@lists.denx.de > Message-ID:<4dac1427.7060...@emk-elektronik.de> > Content-Type: text/plain; charset=ISO-8859-15 > > Dear Remy Bohmer, >> Signed-off-by: Remy Bohmer<li...@bohmer.net> >> --- >> drivers/spi/atmel_dataflash_spi.c | 8 ++++---- >> 1 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/spi/atmel_dataflash_spi.c >> b/drivers/spi/atmel_dataflash_spi.c >> index 4a5c4aa..2f23f54 100644 >> --- a/drivers/spi/atmel_dataflash_spi.c >> +++ b/drivers/spi/atmel_dataflash_spi.c >> @@ -133,7 +133,7 @@ unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); >> >> unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) >> { >> - unsigned int timeout; >> + u32 time_start, timeout; >> >> pDesc->state = BUSY; >> >> @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) >> } >> >> /* arm simple, non interrupt dependent timer */ >> - reset_timer_masked(); >> - timeout = 0; >> + time_start = get_timer(0); >> >> writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); >> while (!(readl(AT91_BASE_SPI + AT91_SPI_SR)& AT91_SPI_RXBUFF)&& >> - ((timeout = get_timer_masked())< CONFIG_SYS_SPI_WRITE_TOUT)); >> + ((timeout = get_timer(time_start))< >> CONFIG_SYS_SPI_WRITE_TOUT)); >> + >> writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + >> AT91_SPI_PTCR); >> pDesc->state = IDLE; > This issue had already been fixed by the ATMEL rework. > > But you are welcome to further "fix" this driver to use structure SoC access > ;) > > Best Regards, Reinhard > > > ------------------------------ > > Message: 4 > Date: Mon, 18 Apr 2011 12:41:14 +0200 > From: Reinhard Meyer<u-b...@emk-elektronik.de> > Subject: Re: [U-Boot] [PATCH 1/4] atmel_dataflash: remove use of > get_timer_masked > To: Alessandro Rubini<rub...@gnudd.com> > Cc: u-boot@lists.denx.de > Message-ID:<4dac154a.6080...@emk-elektronik.de> > Content-Type: text/plain; charset=ISO-8859-1 > > Dear Alessandro Rubini: >> Commit 5dca710a3d7703e41da0e9894f2d71f9e25bea6b removed >> get_timer_masked for at91. The dataflash driver was still >> using it and so stopped compiling. This blindly fixes >> the compilation problem (I am not currently using dataflash). >> >> Signed-off-by: Alessandro Rubini<rub...@gnudd.com> >> --- >> drivers/spi/atmel_dataflash_spi.c | 4 ++-- >> 1 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/spi/atmel_dataflash_spi.c >> b/drivers/spi/atmel_dataflash_spi.c >> index 4a5c4aa..d5215c0 100644 >> --- a/drivers/spi/atmel_dataflash_spi.c >> +++ b/drivers/spi/atmel_dataflash_spi.c >> @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) >> } >> >> /* arm simple, non interrupt dependent timer */ >> - reset_timer_masked(); >> + reset_timer(); >> timeout = 0; >> >> writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); >> while (!(readl(AT91_BASE_SPI + AT91_SPI_SR)& AT91_SPI_RXBUFF)&& >> - ((timeout = get_timer_masked())< CONFIG_SYS_SPI_WRITE_TOUT)); >> + ((timeout = get_timer(0))< CONFIG_SYS_SPI_WRITE_TOUT)); >> writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + >> AT91_SPI_PTCR); >> pDesc->state = IDLE; >> > a) reset_timer(), and all *_masked() timer functions are depreciated and have > been > removed from AT91 timer code > b) the problem has already been fixed in current u-boot-atmel/next > > Best Regards, > Reinhard > > > ------------------------------ > > Message: 5 > Date: Mon, 18 Apr 2011 12:53:12 +0200 > From: Reinhard Meyer<u-b...@emk-elektronik.de> > Subject: Re: [U-Boot] [PATCH 2/3] avr32: fix linking > To: Andreas Bie?mann<biessm...@corscience.de> > Cc: u-boot@lists.denx.de > Message-ID:<4dac1818.9050...@emk-elektronik.de> > Content-Type: text/plain; charset=UTF-8 > > Dear Andreas Bie?mann: >> This patch fixes following error: >> >> ---8<--- >> avr32-linux-ld: --gc-sections and -r may not be used together >> --->8--- >> >> Since 8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken >> due >> to linking error as seen above. >> >> Signed-off-by: Andreas Bie?mann<biessm...@corscience.de> >> --- >> arch/avr32/config.mk | 2 +- >> board/atmel/atngw100/config.mk | 1 - >> board/atmel/atstk1000/config.mk | 1 - >> board/earthlcd/favr-32-ezkit/config.mk | 1 - >> board/mimc/mimc200/config.mk | 1 - >> board/miromico/hammerhead/config.mk | 1 - >> 6 files changed, 1 insertions(+), 6 deletions(-) > Applied to u-boot-atmel/next, thanks. > > Reinhard > > > ------------------------------ > > Message: 6 > Date: Mon, 18 Apr 2011 12:53:53 +0200 > From: Orjan Friberg<orjan.frib...@flatfrog.com> > Subject: [U-Boot] Beagle mux config: nCS5 vs. DMAREQ2? > To: "u-boot@lists.denx.de"<u-boot@lists.denx.de> > Message-ID:<4dac1841.2030...@flatfrog.com> > Content-Type: text/plain; charset="ISO-8859-1"; format=flowed > > Hi, > > The mux configuration in board/ti/beagle/beagle.h says > > MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/ > MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/ > > The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6. > > (Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2 > working on a custom 3730 board.) > > Thanks, > Orjan > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
