On 11:35-20240614, Jonathan Humphreys wrote: > Enable on disk capsule updates, which includes defining the firmware > components (tiboot3, spl, u-boot) and enabling processing of raw capsule > updates. > > This is enabled for several TI SoC based platforms: AM64, AM62, AM62p, > AM69, BeaglePlay, J7, and BeagleboneAI. The configs to enable this are in a > single base config file. This will make it more scalable to add additional > EFI capsule features (like authentication) across all TI boards that have > capsules enabled. > > This series also includes enabling serial flash DFU for AM62 and MMC DFU > for beagleplay. > > Changes from v1: > - Added sysfw.itb capsule definition to beagleboneai64 > - removed extra commas in structure definitions > > Changes from v2: > - Added documentation on OSPI flash layouts > - Improved comments for capsule GUIDs definitions > - Defined board unique capsule GUIDs and put definitions in board specific > files > - Added a Capsule Update porting section to the documentation > > Changes from v3: > - Added better commit messages based upon checkpatch warnings. > - Remove conditional inclusion of capsule update firmware info > - Converted OSPI layout diagram to svg format > Link to v3: > https://lore.kernel.org/r/20240419205701.163821-1-j-humphr...@ti.com > > Changes from v4: > - Added am69 SK board > - Corrected a few spelling mistakes and clarity improvements in k3 docs > section > - Added CONFIG_SET_DFU_ALT_INFO guard around set_dfu_alt_info() > Link to v4: > https://lore.kernel.org/r/20240509164123.1753050-1-j-humphr...@ti.com > > Changes from v5: > - Created an EFI capsule base config for TI boards, making adding > additional capsule features on TI boards more scalable. > Link to v5: > https://lore.kernel.org/r/20240531222118.2618041-1-j-humphr...@ti.com > > Changes from v6: > - Rebased on latest -next > - added tags > Link to v6: > https://lore.kernel.org/r/20240607223858.1971290-1-j-humphr...@ti.com > > Jonathan Humphreys (24): > doc: uefi: capsules: Add Capsule Update porting section > doc: ti: k3: Correct spelling mistakes and improve clarity > configs: ti: Create base EFI capsule configs for TI K3 devices > board: am64x: Define capsule update firmware info > configs: am64x: Enable EFI capsule update > doc: board: ti: am64x: document OSPI layout > board: j721e: Define capsule update firmware info > configs: j721e: Enable EFI capsule update > doc: board: ti: j721e: document OSPI layout > board: beagleplay: Define capsule update firmware info > configs: beagleplay: Enable DFU for MMC > configs: beagleplay: Enable EFI capsule update > board: am62x: Define capsule update firmware info > configs: am62x: Enable EFI capsule update > doc: board: ti: am62x: document OSPI layout > board: am62px: Define capsule update firmware info > configs: am62px: Enable EFI capsule update > doc: board: ti: am62px: document OSPI layout > board: beagleboneai64: Define capsule update firmware info > configs: beagleboneai64: Enable EFI capsule update > configs: j784s4_evm: Enable serial flash DFU support > board: sk-am69: Define capsule update firmware info > configs: j784s4: Enable EFI capsule update > doc: board: ti: j784s4: document OSPI NOR layout
Jon, Could you submit a follow on patch to add under the appropriate subsection of [1] instructions for build environment and steps to copy the capsules? I just ran into an issue with next where my build container was missing uuid-dev package and my builds broke overnight for u-boot/next. looking for documentation, I did not see the change. [1] https://github.com/u-boot/u-boot/blob/master/doc/board/ti/k3.rst?plain=1#L203 -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
