> > Dear "Paulraj, Sandeep", > > In message <0554bef07d437848af01b9c9b5f0bc5dc365d...@dlee01.ent.ti.com> > you wrote: > > > > > From: Alexander Holler <hol...@ahsoftware.de> > > > > > > Using the new env import command it is possible to use plain text > files > > > instead > > > of script-images. Plain text files are much easier to handle. > > > > > > E.g. If your boot.scr contains the following: > > > ----------------------------------- > > > setenv dvimode 1024x768-16@60 > > > run loaduimage > > > run mmcboot > > > ----------------------------------- > > > you could create a file named uEnv.txt and use that instead of > boot.scr: > > > ----------------------------------- > > > dvimode=1024x768-16@60 > > > uenvcmd=run loaduimage; run mmcboot > > > ----------------------------------- > > > The variable uenvcmd (if existent) will be executed (using run) after > > > uEnv.txt > > > was loaded. If uenvcmd doesn't exist the default boot sequence will be > > > started, > > > therefore you could just use > > > ----------------------------------- > > > dvimode=1024x768-16@60 > > > ----------------------------------- > > > as uEnv.txt because loaduimage and mmcboot is part of the default boot > > > sequence. > > > > > > For backwards compatibility the use of boot.scr is still supported. > > > --- > > > Changes for v2: > > > - Eliminated else redundant clause that would be ignored if boot > > > succeeds. > > > > > > Changes for v3: > > > - Removed boot.scr per discussion with Alexander. > > > > > > Signed-off-by: Jason Kridner <jkrid...@beagleboard.org> > > > --- > > > > Pushed to u-boot-ti after making changes to the patch header > > I think you might have missed Jason Kridner's Signed-off-by ? > > Best regards, > > Wolfgang Denk
Thanks, I have fixed this. I had to edit the patch headers of quite a few patches and missed this one. Regards, Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
