Hi Christian,
On 6/6/24 4:29 PM, Christian Marangi wrote:
Add a new activity LED config and additional functions to implement a
simple software blink feature to signal activity of any kind.
Usual activity might be a file transfer with TFTP, a flash write...
User of this API will call status_led_activity_start/stop() on each
activity and LED will be toggled based on the defined FREQ config value.
With this enabled, cyclic API are also enabled as this makes use of
cyclic API to handle LED blink.
Signed-off-by: Christian Marangi <ansuels...@gmail.com>
---
drivers/led/Kconfig | 16 +++++++++++++++
drivers/misc/status_led.c | 41 +++++++++++++++++++++++++++++++++++++++
include/status_led.h | 2 ++
3 files changed, 59 insertions(+)
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 6c4f02d71f2..869ed78e87f 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -359,6 +359,22 @@ config LED_STATUS_BOOT
endif # LED_STATUS_BOOT_ENABLE
+config LED_STATUS_ACTIVITY_ENABLE
+ bool "Enable BOOT LED"
+ select CYCLIC
+ help
+ Enable to turn an LED on when the board is doing some
+ activity (flash write, file download).
+
+if LED_STATUS_ACTIVITY_ENABLE
+
+config LED_STATUS_ACTIVITY
+ int "LED to light when the board is doing some activity"
+ help
+ Valid enabled LED device number.
+
+endif # LED_STATUS_ACTIVITY_ENABLE
+
config LED_STATUS_RED_ENABLE
bool "Enable red LED"
help
diff --git a/drivers/misc/status_led.c b/drivers/misc/status_led.c
index 93bfb410662..5ee68c7c77d 100644
--- a/drivers/misc/status_led.c
+++ b/drivers/misc/status_led.c
@@ -5,6 +5,7 @@
*/
#include <common.h>
+#include <cyclic.h>
#include <status_led.h>
/*
@@ -23,6 +24,7 @@ typedef struct {
int state;
int period;
int cnt;
+ struct cyclic_info *cyclic;
} led_dev_t;
led_dev_t led_dev[] = {
@@ -140,3 +142,42 @@ void status_led_toggle(int led)
__led_toggle(ld->mask);
}
+
+static void status_led_activity_toggle(void *ctx)
+{
+ __led_toggle(*(led_id_t *)ctx);
+}
+
+void status_led_activity_start(int led)
+{
+ led_dev_t *ld;
+
+ ld = status_get_led_dev(led);
+ if (!ld)
+ return;
Should we print an error here as well? This seems to mean we are calling
this function with an LED that doesn't exist?
+
+ if (ld->cyclic) {
+ printf("Cyclic for activity status LED already registered. THIS IS
AN ERROR.\n");
What about giving the info of which activity status LED is problematic?
So that if somehow we have multiple activity status LED, we have some
idea where to look in the code already without adding more debug code to
get started?
+ cyclic_unregister(ld->cyclic);
+ }
+
+ status_led_set(led, CONFIG_LED_STATUS_BLINKING);
+
+ ld->cyclic = cyclic_register(status_led_activity_toggle,
+ ld->period * 500, "activity", &ld->mask);
+ if (!ld->cyclic)
+ printf("Registering of cyclic function for activity status LED
failed\n");
Ditto.
+}
+
+void status_led_activity_stop(int led)
+{
+ led_dev_t *ld;
+
+ ld = status_get_led_dev(led);
+ if (!ld)
+ return;
Ditto.
Cheers,
Quentin
