On Thu, 6 Jun 2024 at 19:53, Ilias Apalodimas
<ilias.apalodi...@linaro.org> wrote:
>
> [...]
>
> > +static int ping_raw_init(void *recv_arg)
> > +{
> > + ping_pcb = raw_new(IP_PROTO_ICMP);
> > + if (!ping_pcb)
> > + return -ENOMEM;
> > +
> > + raw_recv(ping_pcb, ping_recv, recv_arg);
> > + raw_bind(ping_pcb, IP_ADDR_ANY);
> > +
> > + return 0;
> > +}
> > +
> > +static void ping_raw_stop(void)
> > +{
> > + if (ping_pcb != NULL) {
>
> nits, but we usually do if (!ping_pcb) for NULL pointers and variables
> that have a value of 0.
> Please change it in other files as well
>
>
> > + raw_remove(ping_pcb);
> > + ping_pcb = NULL;
> > + }
> > +}
> > +
> > +static void ping_prepare_echo(struct icmp_echo_hdr *iecho)
> > +{
> > + ICMPH_TYPE_SET(iecho, ICMP_ECHO);
> > + ICMPH_CODE_SET(iecho, 0);
> > + iecho->chksum = 0;
> > + iecho->id = PING_ID;
> > + iecho->seqno = lwip_htons(++ping_seq_num);
> > +
> > + iecho->chksum = inet_chksum(iecho, sizeof(*iecho));
> > +}
> > +
> > +static void ping_send_icmp(struct raw_pcb *raw, const ip_addr_t *addr)
> > +{
> > + struct pbuf *p;
> > + struct icmp_echo_hdr *iecho;
> > + size_t ping_size = sizeof(struct icmp_echo_hdr);
> > +
> > + p = pbuf_alloc(PBUF_IP, (u16_t)ping_size, PBUF_RAM);
> > + if (!p)
> > + return;
> > +
> > + if ((p->len == p->tot_len) && (p->next == NULL)) {
>
> && !p->next
>
> > + iecho = (struct icmp_echo_hdr *)p->payload;
> > + ping_prepare_echo(iecho);
> > + raw_sendto(raw, p, addr);
> > + }
> > +
> > + pbuf_free(p);
> > +}
> > +
> > +static void ping_send(void *arg)
> > +{
> > + struct raw_pcb *pcb = (struct raw_pcb *)arg;
> > +
> > + ping_send_icmp(pcb, ping_target);
> > + sys_timeout(PING_DELAY_MS, ping_send, ping_pcb);
> > +}
> > +
> > +static int ping_loop(const ip_addr_t* addr)
> > +{
> > + bool alive;
> > + ulong start;
> > + int ret;
> > +
> > + printf("Using %s device\n", eth_get_name());
> > +
> > + ret = ping_raw_init(&alive);
> > + if (ret < 0)
> > + return ret;
> > + ping_target = addr;
> > + ping_seq_num = 0;
> > +
> > + start = get_timer(0);
> > + ping_send(ping_pcb);
> > +
> > + do {
> > + eth_rx();
> > + if (alive)
> > + break;
> > + sys_check_timeouts();
> > + if (ctrlc()) {
> > + printf("\nAbort\n");
> > + break;
> > + }
> > + } while (get_timer(start) < PING_TIMEOUT_MS);
>
> I am a bit confused about what happens here.
> ping_send() will send the packet, but it will also schedule itself to
> rerun after 1 ms and send another ping?
>
> > +
> > + sys_untimeout(ping_send, ping_pcb);
>
> So we need the sys_untimeout() because we queued 2 pings? Because
> sys_timeout() is supposed to be an one shot.
Ah nvm, I misread that. We always reschedule ping_send_icmp(), that's
why we have to delete it here
>
> Thanks
> /Ilias
> > + ping_raw_stop();
> > + ping_target = NULL;
> > +
> > + if (alive) {
> > + alive = false;
> > + return 0;
> > + }
> > + printf("ping failed; host %s is not alive\n", ipaddr_ntoa(addr));
> > + return -1;
> > +}
> > +
> > +int do_ping(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> > +{
> > + ip_addr_t addr;
> > +
> > + if (argc < 2)
> > + return CMD_RET_USAGE;
> > +
> > + if (!ipaddr_aton(argv[1], &addr))
> > + return CMD_RET_USAGE;
> > +
> > + if (ping_loop(&addr) < 0)
> > + return CMD_RET_FAILURE;
> > +
> > + return CMD_RET_SUCCESS;
> > +}
> > --
> > 2.40.1
> >
