Use the fdt_kaslrseed function to deduplicate code doing the same thing. Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now but left in place in case boot scripts exist that rely on this command existing and returning success. An informational message is printed to alert users of this command that it is likely no longer needed.
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for randomization and completely ignores the kaslr-seed for its own randomness needs (i.e the randomization of the physical placement of the kernel). It gets weeded out from the DTB that gets handed over via efi_install_fdt() as it would also mess up the measured boot DTB TPM measurements as well. Signed-off-by: Tim Harvey <thar...@gateworks.com> Cc: Michal Simek <michal.si...@amd.com> Cc: Andy Yan <andy....@rock-chips.com> Cc: Akash Gajjar <gajjar04ak...@gmail.com> Cc: Ilias Apalodimas <ilias.apalodi...@linaro.org> Cc: Simon Glass <s...@chromium.org> Cc: Patrick Delaunay <patrick.delau...@foss.st.com> Cc: Patrice Chotard <patrice.chot...@foss.st.com> Cc: Devarsh Thakkar <devar...@ti.com> Cc: Heinrich Schuchardt <xypron.g...@gmx.de> Cc: Hugo Villeneuve <hvillene...@dimonoff.com> Cc: Marek Vasut <ma...@denx.de> Cc: Tom Rini <tr...@konsulko.com> Cc: Chris Morgan <macromor...@hotmail.com> --- v5: - fixed typo in commit message s/it's/its/ - use cmd_process_error per Michal's suggestion v4: - add missing /n to notice in kaslrseed cmd - combine ints in declaration - remove unused vars from board/xilinx/common/board.c ft_board_setup v3: - skip if CONFIG_MEASURED_BOOT - fix skip for CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT - pass in rng index and bool to specify overwrite - remove duplicate error strings printed outside of fdt_kaslrseed - added note to commit log about how EFI STUB weeds out kalsr-seed v2: - fix typo in commit msg - use stack for seed to avoid unecessary malloc/free - move to a library function and deduplicate code by using it elsewhere --- board/xilinx/common/board.c | 40 ------------------------------ boot/pxe_utils.c | 34 +------------------------ cmd/kaslrseed.c | 49 ++++++------------------------------- 3 files changed, 8 insertions(+), 115 deletions(-) diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index b47d2d23f913..098738017bab 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -702,11 +702,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) #define MAX_RAND_SIZE 8 int ft_board_setup(void *blob, struct bd_info *bd) { - size_t n = MAX_RAND_SIZE; - struct udevice *dev; - u8 buf[MAX_RAND_SIZE]; - int nodeoffset, ret; - static const struct node_info nodes[] = { { "arm,pl353-nand-r2p1", MTD_DEV_TYPE_NAND, }, }; @@ -714,41 +709,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS) && IS_ENABLED(CONFIG_NAND_ZYNQ)) fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - debug("No RNG device\n"); - return 0; - } - - if (dm_rng_read(dev, buf, n)) { - debug("Reading RNG failed\n"); - return 0; - } - - if (!blob) { - debug("No FDT memory address configured. Please configure\n" - "the FDT address via \"fdt addr <address>\" command.\n" - "Aborting!\n"); - return 0; - } - - ret = fdt_check_header(blob); - if (ret < 0) { - debug("fdt_chosen: %s\n", fdt_strerror(ret)); - return ret; - } - - nodeoffset = fdt_find_or_add_subnode(blob, 0, "chosen"); - if (nodeoffset < 0) { - debug("Reading chosen node failed\n"); - return nodeoffset; - } - - ret = fdt_setprop(blob, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (ret < 0) { - debug("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret)); - return ret; - } - return 0; } #endif diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c index 5c1c962ff4c1..38ca9b81a42d 100644 --- a/boot/pxe_utils.c +++ b/boot/pxe_utils.c @@ -324,10 +324,6 @@ static void label_boot_kaslrseed(void) #if CONFIG_IS_ENABLED(DM_RNG) ulong fdt_addr; struct fdt_header *working_fdt; - size_t n = 0x8; - struct udevice *dev; - u64 *buf; - int nodeoffset; int err; /* Get the main fdt and map it */ @@ -343,35 +339,7 @@ static void label_boot_kaslrseed(void) if (err <= 0) return; - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - printf("No RNG device\n"); - return; - } - - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen"); - if (nodeoffset < 0) { - printf("Reading chosen node failed\n"); - return; - } - - buf = malloc(n); - if (!buf) { - printf("Out of memory\n"); - return; - } - - if (dm_rng_read(dev, buf, n)) { - printf("Reading RNG failed\n"); - goto err; - } - - err = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (err < 0) { - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(err)); - goto err; - } -err: - free(buf); + fdt_kaslrseed(working_fdt, true); #endif return; } diff --git a/cmd/kaslrseed.c b/cmd/kaslrseed.c index 9acb8e163863..645cab2e74fd 100644 --- a/cmd/kaslrseed.c +++ b/cmd/kaslrseed.c @@ -16,56 +16,21 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - size_t n = 0x8; - struct udevice *dev; - u64 *buf; - int nodeoffset; - int ret = CMD_RET_SUCCESS; + int err = CMD_RET_SUCCESS; - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - printf("No RNG device\n"); - return CMD_RET_FAILURE; - } - - buf = malloc(n); - if (!buf) { - printf("Out of memory\n"); - return CMD_RET_FAILURE; - } - - if (dm_rng_read(dev, buf, n)) { - printf("Reading RNG failed\n"); - return CMD_RET_FAILURE; - } + printf("Notice: a /chosen/kaslr-seed is automatically added to the device-tree when booted via booti/bootm/bootz therefore using this command is likely no longer needed\n"); if (!working_fdt) { printf("No FDT memory address configured. Please configure\n" "the FDT address via \"fdt addr <address>\" command.\n" "Aborting!\n"); - return CMD_RET_FAILURE; - } - - ret = fdt_check_header(working_fdt); - if (ret < 0) { - printf("fdt_chosen: %s\n", fdt_strerror(ret)); - return CMD_RET_FAILURE; - } - - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen"); - if (nodeoffset < 0) { - printf("Reading chosen node failed\n"); - return CMD_RET_FAILURE; + err = CMD_RET_FAILURE; + } else { + if (fdt_kaslrseed(working_fdt, true) < 0) + err = CMD_RET_FAILURE; } - ret = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (ret < 0) { - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret)); - return CMD_RET_FAILURE; - } - - free(buf); - - return ret; + return cmd_process_error(cmdtp, err); } U_BOOT_LONGHELP(kaslrseed, -- 2.25.1