On 5/15/24 14:41, lukas.funke-...@weidmueller.com wrote:
From: Lukas Funke <lukas.fu...@weidmueller.com>


This series adds a driver to read and write ZynqMP eFuses [1]. The
driver can be accessed by the 'fuse read' and 'fuse write' commands

Example:

=> fuse read 0 0xc 3
Reading bank 0:

Word 0x0000000c: 3cb16685 013af244 40000000

Note: Accessing eFuses requires eFuse access to be enabled in the
underlying PMU firmware.

Can you please put this note to 2/2 commit msg?

Thanks,
Michal

Reply via email to