This series adds device-tree changes (specific to u-boot only), config changes and env changes to enable ICSSG Ethernet Driver on AM64x.
Patch 1/3 adds remoteproc-name property to the pru cores in k3-am642-evm-u-boot.dtsi file. This property is not needed in Linux thus it's not part of the PRU nodes in k3-am64x-main.dtsi. Adding this in *u-boot.dtsi as it is only needed for u-boot. Without this different PRU nodes can have same remoteproc-name which results into probe failure. For example the node "pru0_0: pru@34000" and "pru1_0: pru@34000" both will have remoteproc-name as "pru@34000" without this patch, resulting in probe failure because of non-unique name (_rproc_name_is_unique() API) of PRU core. Patch 2/3 Enables necessary configs for AM64x to enable ICSSG driver Patch 3/3 Sets env variables needed for ICSSG driver Thanks and Regards, MD Danish Anwar MD Danish Anwar (3): arm: dts: k3-am642-evm-u-boot: Add remoteproc-name for PRU cores configs: am64x_evm_a53: Enable ICSSG Driver board: ti: am64x: Set storage_interface and fw_dev_part ENVs arch/arm/dts/k3-am642-evm-u-boot.dtsi | 44 +++++++++++++++++++++++++++ board/ti/am64x/am64x.env | 5 +++ configs/am64x_evm_a53_defconfig | 5 +++ 3 files changed, 54 insertions(+) base-commit: 7d24c3e06fa9a3b53cea593d4579886ef0eb4fe8 -- 2.34.1
