Hi Alexander,

Thank you for the patch.

On ven., avril 12, 2024 at 22:26, "A. Sverdlin" 
<alexander.sverd...@siemens.com> wrote:

> From: Felipe Balbi <felipe.ba...@linux.intel.com>
>
> Upstream Linux commit ab2a92e7a608.
>
> As a micro-power optimization, let's only resume the
> USB2 PHY if we're working on <=HIGHSPEED. If we're
> gonna work on SUPERSPEED or SUPERSPEED+, there's no
> point in resuming the USB2 PHY.
>
> Fixes: 2b0f11df84bb ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds")
> Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com>
> Signed-off-by: Alexander Sverdlin <alexander.sverd...@siemens.com>

Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com>

> ---
>  drivers/usb/dwc3/gadget.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 8f6513752f085..00845dbadd27a 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -314,11 +314,13 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned 
> ep,
>        * We will also set SUSPHY bit to what it was before returning as stated
>        * by the same section on Synopsys databook.
>        */
> -     reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> -     if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
> -             susphy = true;
> -             reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> -             dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +     if (dwc->gadget.speed <= USB_SPEED_HIGH) {
> +             reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> +             if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
> +                     susphy = true;
> +                     reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> +                     dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> +             }
>       }
>  
>       dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
> -- 
> 2.44.0

Reply via email to