The GPIO2_D6 pin is changed to use func-4 using pcie30x2m1_pins during
probe of pcie3x2. This cause the device to lock-up when pci driver use
the reset-gpios unless the pin is first changed to use gpio pinmux.
Drop the board u-boot.dtsi workaround now that the gpio and pinctrl
drivers automatically use gpio pinmux when a gpio is requested.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
index 9d18f5d0b364..f4e2dc91ddfb 100644
--- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
@@ -6,18 +6,6 @@
#include "rk356x-u-boot.dtsi"
-&pcie3x2 {
- pinctrl-0 = <&pcie3x2_reset_h>;
-};
-
-&pinctrl {
- pcie {
- pcie3x2_reset_h: pcie3x2-reset-h {
- rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
&sdhci {
cap-mmc-highspeed;
mmc-hs200-1_8v;
--
2.43.2
