Hi,
> -----Original Message-----
> From: c...@mailbox.org <c...@mailbox.org>
> Sent: Thursday, April 4, 2024 3:58 PM
> To: u-boot@lists.denx.de
> Cc: Maximilian Brune <maximilian.br...@9elements.com>; Peng Fan
> <peng....@nxp.com>; Jaehoon Chung
> <jh80.ch...@samsung.com>
> Subject: [PATCH v2] mmc: arm_pl180: Limit data transfer to U16_MAX
>
> From: Maximilian Brune <maximilian.br...@9elements.com>
>
> Currently fetching files bigger that cause a data transfer greater than
> U16_MAX fails.
>
> The reason is that the specification defines the datalength register
> as a 16 bit wide register, but in u-boot it is used as if it is an
> 32 bit register. Therefore values greater than U16_MAX cause an
> infinite loop inside u-boot. U-boot expects to get more data from
> interface/hardware then it will ever get and therefore inifintely waits
> for more data that will never come.
>
> Signed-off-by: Maximilian Brune <maximilian.br...@9elements.com>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Best Regards,
Jaehoon Chung
> Cc: Peng Fan <peng....@nxp.com>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> ---
> drivers/mmc/arm_pl180_mmci.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
> index 5cf5502ed5..cad73ea106 100644
> --- a/drivers/mmc/arm_pl180_mmci.c
> +++ b/drivers/mmc/arm_pl180_mmci.c
> @@ -231,6 +231,7 @@ static int do_data_transfer(struct mmc *dev,
> u32 blksz = 0;
> u32 data_ctrl = 0;
> u32 data_len = (u32) (data->blocks * data->blocksize);
> + assert(data_len < U16_MAX); /* should be ensured by arm_pl180_get_b_max
> */
>
> if (!host->version2) {
> blksz = (ffs(data->blocksize) - 1);
> @@ -358,6 +359,14 @@ static int host_set_ios(struct mmc *dev)
> return 0;
> }
>
> +static int arm_pl180_get_b_max(struct udevice *dev, void *dst, lbaint_t
> blkcnt)
> +{
> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> + struct mmc *mmc = upriv->mmc;
> +
> + return U16_MAX / mmc->read_bl_len;
> +}
> +
> #ifndef CONFIG_DM_MMC
> /* MMC uses open drain drivers in the enumeration phase */
> static int mmc_host_reset(struct mmc *dev)
> @@ -373,6 +382,7 @@ static const struct mmc_ops arm_pl180_mmci_ops = {
> .send_cmd = host_request,
> .set_ios = host_set_ios,
> .init = mmc_host_reset,
> + .get_b_max = arm_pl180_get_b_max,
> };
>
> /*
> @@ -531,6 +541,7 @@ static const struct dm_mmc_ops arm_pl180_dm_mmc_ops = {
> .send_cmd = dm_host_request,
> .set_ios = dm_host_set_ios,
> .get_cd = dm_mmc_getcd,
> + .get_b_max = arm_pl180_get_b_max,
> };
>
> static int arm_pl180_mmc_of_to_plat(struct udevice *dev)
> --
> 2.44.0
