Instead of displaying what looks like an error message if a gpio-reset dt prop is missing for a TPM display a warning that having a gpio reset on a TPM should not be used for a secure production device.
TCG TIS spec [1] says: "The TPM_Init (LRESET#/SPI_RST#) signal MUST be connected to the platform CPU Reset signal such that it complies with the requirements specified in section 1.2.7 HOST Platform Reset in the PC Client Implementation Specification for Conventional BIOS." The reasoning is that you should not be able to toggle a GPIO and reset the TPM without resetting the CPU as well because if an attacker can break into your OS via an OS level security flaw they can then reset the TPM via GPIO and replay the measurements required to unseal keys that you have otherwise protected. [1] https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClientTPMInterfaceSpecification_TIS__1-3_27_03212013.pdf Signed-off-by: Tim Harvey <thar...@gateworks.com> --- v2: change the message to a warning and update commit desc/log --- drivers/tpm/tpm2_tis_spi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tpm/tpm2_tis_spi.c b/drivers/tpm/tpm2_tis_spi.c index de9cf8f21e07..c9c83f6f0fc8 100644 --- a/drivers/tpm/tpm2_tis_spi.c +++ b/drivers/tpm/tpm2_tis_spi.c @@ -237,14 +237,14 @@ static int tpm_tis_spi_probe(struct udevice *dev) /* legacy reset */ ret = gpio_request_by_name(dev, "gpio-reset", 0, &reset_gpio, GPIOD_IS_OUT); - if (ret) { - log(LOGC_NONE, LOGL_NOTICE, - "%s: missing reset GPIO\n", __func__); + if (ret) goto init; - } log(LOGC_NONE, LOGL_NOTICE, "%s: gpio-reset is deprecated\n", __func__); } + log(LOGC_NONE, LOGL_WARNING, + "%s: TPM gpio reset should not be used on secure production devices\n", + dev->name); dm_gpio_set_value(&reset_gpio, 1); mdelay(1); dm_gpio_set_value(&reset_gpio, 0); -- 2.25.1