> -----Original Message----- > From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] > Sent: Friday, April 08, 2011 6:18 PM > To: u-boot@lists.denx.de > Cc: holger.bru...@keymile.com; h...@denx.de; Valentin Longchamp; Wolfgang > Denk; Detlev Zundel; Prafulla Wadaskar > Subject: [PATCH] arm/km: add mkimage config file for uart download > > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Acked-by: Heiko Schocher <h...@denx.de> > cc: Wolfgang Denk <w...@denx.de> > cc: Detlev Zundel <d...@denx.de> > cc: Prafulla Wadaskar <prafu...@marvell.com> > --- > board/keymile/km_arm/kwbimage-uart.cfg | 179 > ++++++++++++++++++++++++++++++++ > 1 files changed, 179 insertions(+), 0 deletions(-) > create mode 100644 board/keymile/km_arm/kwbimage-uart.cfg > > diff --git a/board/keymile/km_arm/kwbimage-uart.cfg > b/board/keymile/km_arm/kwbimage-uart.cfg > new file mode 100644 > index 0000000..d8c517c > --- /dev/null > +++ b/board/keymile/km_arm/kwbimage-uart.cfg > @@ -0,0 +1,179 @@ > +# > +# (C) Copyright 2010 > +# Heiko Schocher, DENX Software Engineering, h...@denx.de. > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > +# MA 02110-1301 USA > +# > +# Refer docs/README.kwimage for more details about how-to configure > +# and create kirkwood boot image > +# > + > +# Boot Media configurations > +BOOT_FROM uart # Boot from SPI flash
Comments are wrong here.. I think this is more over debug support. i.e. if you want to bring up broken board with the help of UART. Does it makes sense to mainline? Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
