Define dfu_alt_info with SPI NOR layout to make it easy to
install or update bootloader in the SPI NOR using dfu-util.
Use the following U-Boot commands to start DFU mode:
"
=> sf probe && dfu 0 mtd
"
Use the following dfu-util invocation on Host PC to install binaries:
"
$ dfu-util -w -a 0 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
$ dfu-util -w -a 1 -D build/stm32mp1/release/tf-a-stm32mp135f-dhcor-dhsbc.stm32
$ dfu-util -w -a 2 -D build/stm32mp1/release/fip.bin
"
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-b...@dh-electronics.com
Cc: u-boot@lists.denx.de
Cc: uboot-st...@st-md-mailman.stormreply.com
---
include/configs/stm32mp13_common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/stm32mp13_common.h
b/include/configs/stm32mp13_common.h
index 5b0658ced92..d6e4f8fd915 100644
--- a/include/configs/stm32mp13_common.h
+++ b/include/configs/stm32mp13_common.h
@@ -63,6 +63,7 @@
"fi;\0"
#define STM32MP_EXTRA \
+ "dfu_alt_info=mtd nor0=fsbl1 raw 0x0 0x40000;fsbl2 raw 0x40000
0x40000;uboot raw 0x80000 0x160000\0" \
"env_check=if env info -p -d -q; then env save; fi\0" \
"boot_net_usb_start=true\0"
--
2.43.0
