Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
the apalis-imx8qm board no longer boots.
The reason is that the imx8qm clock driver does not handle the
LPUART IPG clocks inside get_rate(), set_rate() and enable() functions.
Fix the boot regression by adding the LPUART IPG entries.
Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock")
Reported-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Signed-off-by: Fabio Estevam <feste...@gmail.com>
---
drivers/clk/imx/clk-imx8qm.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8qm.c b/drivers/clk/imx/clk-imx8qm.c
index 6c05d07c340..01e33de9d63 100644
--- a/drivers/clk/imx/clk-imx8qm.c
+++ b/drivers/clk/imx/clk-imx8qm.c
@@ -95,20 +95,23 @@ ulong imx8_clk_get_rate(struct clk *clk)
resource = SC_R_SDHC_2;
pm_clk = SC_PM_CLK_PER;
break;
- case IMX8QM_UART0_IPG_CLK:
case IMX8QM_UART0_CLK:
+ case IMX8QM_UART0_IPG_CLK:
resource = SC_R_UART_0;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART1_CLK:
+ case IMX8QM_UART1_IPG_CLK:
resource = SC_R_UART_1;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART2_CLK:
+ case IMX8QM_UART2_IPG_CLK:
resource = SC_R_UART_2;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART3_CLK:
+ case IMX8QM_UART3_IPG_CLK:
resource = SC_R_UART_3;
pm_clk = SC_PM_CLK_PER;
break;
@@ -181,18 +184,22 @@ ulong imx8_clk_set_rate(struct clk *clk, unsigned long
rate)
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART0_CLK:
+ case IMX8QM_UART0_IPG_CLK:
resource = SC_R_UART_0;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART1_CLK:
+ case IMX8QM_UART1_IPG_CLK:
resource = SC_R_UART_1;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART2_CLK:
+ case IMX8QM_UART2_IPG_CLK:
resource = SC_R_UART_2;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART3_CLK:
+ case IMX8QM_UART3_IPG_CLK:
resource = SC_R_UART_3;
pm_clk = SC_PM_CLK_PER;
break;
@@ -283,18 +290,22 @@ int __imx8_clk_enable(struct clk *clk, bool enable)
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART0_CLK:
+ case IMX8QM_UART0_IPG_CLK:
resource = SC_R_UART_0;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART1_CLK:
+ case IMX8QM_UART1_IPG_CLK:
resource = SC_R_UART_1;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART2_CLK:
+ case IMX8QM_UART2_IPG_CLK:
resource = SC_R_UART_2;
pm_clk = SC_PM_CLK_PER;
break;
case IMX8QM_UART3_CLK:
+ case IMX8QM_UART3_IPG_CLK:
resource = SC_R_UART_3;
pm_clk = SC_PM_CLK_PER;
break;
--
2.34.1
