On Thu, 2011-04-07 at 22:42 +0200, Schwarz,Andre wrote: > York, > > > > > "Schwarz,Andre" <andre.schw...@matrix-vision.de> hat am 6. April 2011 > um 20:42 geschrieben: > > > York, > > > > > > > > ok - will give it a try tomorrow. > > > > > > > > > hmm - having a look at the Makefile it looks like I need > CONFIG_FSL_DDR2. > > This seems to pull in the "new" code ... without omitting the "old" > one > > in arch/powerpc/cpu/mpc83xx/spd_sdram.c > > > > The Makefile further uses ctrl_regs.c ... which fails. > > > > having a look arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c gives : > > > > #ifdef CONFIG_MPC85xx > > #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR > > #elif defined(CONFIG_MPC86xx) > > #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR > > #else > > #error "Undefined _DDR_ADDR" > > #endif > > > > There's not a single sign of any 83xx within this code. > > Grepping through the board configs only show 85xx and 86xx based > boards using it. > > > > Sorry, but I'm feeling like an idiot. > > > > Are you playing some game with me or am I simply unable to understand > the code ? > > > > Please shed some light on this. > > Andre,
I am sorry I totally ignored the subject with mpc83xx. I was thinking of mpc85xx. You are right the old code is in spd_sdram.c and it is still in use for mpc83xx. Unless to adjust the code, there is no board specific file. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
