On Wed, Apr 6, 2011 at 7:31 PM, Scott Wood wrote: > Currently, some linker scripts are found by common code in config.mk. > Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is > sometimes in arch config.mk and sometimes in board config.mk. Some > are found using an arch-specific rule for looking in CPUDIR, etc. > > Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL > when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact > that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. > > Replace all of this -- except for a handful of boards that are actually > selecting a linker script in a unique way -- with centralized ldscript > finding. > > If board code specifies LDSCRIPT, that will be used. > Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. > > If neither of these are specified, then the central config.mk will > check for the existence of the following, in order: > > $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) > $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) > $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds > $(TOPDIR)/$(CPUDIR)/u-boot.lds
i guess if i simply renamed blackfin/u-boot.lds.S to blackfin/u-boot.lds, things would "just work" for me too. -mike _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
