Use CONFIG_OMAP3_MMC in cm-t35 configuration file.

Signed-off-by: Igor Grinberg <grinb...@compulab.co.il>
---
 board/cm_t35/cm_t35.c    |    7 -------
 include/configs/cm_t35.h |    3 +--
 2 files changed, 1 insertions(+), 9 deletions(-)

diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index 3b6f7ef..23efacc 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -272,13 +272,6 @@ void set_muxconf_regs(void)
        MUX_VAL(CP(MMC1_DAT7),          (IEN  | PTU | EN  | M0)); /*MMC1_DAT7*/
 }
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-       return omap_mmc_init(0);
-}
-#endif
-
 /*
  * Routine: setup_net_chip_gmpc
  * Description: Setting up the configuration GPMC registers specific to the
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 5624abd..3692810 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -110,9 +110,8 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP_HSMMC              1
+#define CONFIG_OMAP3_MMC               1
 #define CONFIG_DOS_PARTITION           1
 
 /* DDR - I use Micron DDR */
-- 
1.7.3.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to