From: Frieder Schrempf <frieder.schre...@kontron.de>
Describe how to build and boot for the Sielaff i.MX6 Solo board.
Signed-off-by: Frieder Schrempf <frieder.schre...@kontron.de>
---
Changes in v4:
* changes requested by Heinrich (thanks!)
Changes in v3:
* include docs in upper-level index
Changes in v2:
* none
---
doc/board/index.rst | 1 +
doc/board/sielaff/imx6dl-sielaff.rst | 29 ++++++++++++++++++++++++++++
doc/board/sielaff/index.rst | 9 +++++++++
3 files changed, 39 insertions(+)
create mode 100644 doc/board/sielaff/imx6dl-sielaff.rst
create mode 100644 doc/board/sielaff/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst
index d0f9f355d2e..62357c99388 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -42,6 +42,7 @@ Board-specific doc
renesas/index
rockchip/index
samsung/index
+ sielaff/index
siemens/index
sifive/index
sipeed/index
diff --git a/doc/board/sielaff/imx6dl-sielaff.rst
b/doc/board/sielaff/imx6dl-sielaff.rst
new file mode 100644
index 00000000000..699079b3271
--- /dev/null
+++ b/doc/board/sielaff/imx6dl-sielaff.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff i.MX6 Solo Board
+========================
+
+The Sielaff i.MX6 Solo board is a control and Human Machine Interface (HMI)
+board for vending machines.
+
+Quick Start
+-----------
+
+Build U-Boot
+^^^^^^^^^^^^
+
+.. code-block:: bash
+
+ make imx6dl_sielaff_defconfig
+ make CROSS_COMPILE=arm-linux-gnueabi-
+
+Copy the flash.bin file to an SD card at an offset of 1 KiB:
+
+.. code-block:: bash
+
+ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1
+
+Boot
+^^^^
+
+Put the SD card in the slot on the board and apply power.
diff --git a/doc/board/sielaff/index.rst b/doc/board/sielaff/index.rst
new file mode 100644
index 00000000000..a8376484d88
--- /dev/null
+++ b/doc/board/sielaff/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff
+=======
+
+.. toctree::
+ :maxdepth: 2
+
+ imx6dl-sielaff
--
2.43.0
