From: Frieder Schrempf <frieder.schre...@kontron.de> Describe how to build and boot for the Sielaff i.MX6 Solo board.
Signed-off-by: Frieder Schrempf <frieder.schre...@kontron.de> --- Changes in v2: * none --- doc/board/sielaff/imx6dl-sielaff.rst | 32 ++++++++++++++++++++++++++++ doc/board/sielaff/index.rst | 9 ++++++++ 2 files changed, 41 insertions(+) create mode 100644 doc/board/sielaff/imx6dl-sielaff.rst create mode 100644 doc/board/sielaff/index.rst diff --git a/doc/board/sielaff/imx6dl-sielaff.rst b/doc/board/sielaff/imx6dl-sielaff.rst new file mode 100644 index 00000000000..24dd67ccaef --- /dev/null +++ b/doc/board/sielaff/imx6dl-sielaff.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Sielaff i.MX6 Solo Board +======================== + +The Sielaff i.MX6 Solo board is a control and HMI board for vending +machines. + +Quick Start +----------- + +- Build U-Boot +- Boot + +Build U-Boot +^^^^^^^^^^^^ + +.. code-block:: bash + + $ make imx6dl_sielaff_defconfig + $ make CROSS_COMPILE=arm-none-linux-gnueabihf- + +Burn the flash.bin to SD card at an offset of 1 KiB: + +.. code-block:: bash + + $ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1 conv=notrunc + +Boot +^^^^ + +Put the SD card in the slot on the board and apply power. diff --git a/doc/board/sielaff/index.rst b/doc/board/sielaff/index.rst new file mode 100644 index 00000000000..a8376484d88 --- /dev/null +++ b/doc/board/sielaff/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Sielaff +======= + +.. toctree:: + :maxdepth: 2 + + imx6dl-sielaff -- 2.43.0
