On 04/03/2011 02:08 PM, Albert ARIBAUD wrote: > Hi Stefano, > Hi Albert,
> Le 03/04/2011 12:01, Stefano Babic a écrit : >> Commit f326cbba98bae21d41df8daac0bd78121d557af1 breaks mx31pdk, >> as the _end section in u-boot.lds is missing for the nand_spl >> production. > > What command line should one use to reproduce the issue? you should issue mx31pdk_nand. I do not know why there is a special target in the Makefile, I do not think this is necessary and only boards.cfg could be used. But this has nothing to do with the reported error, answering your question I have seen something else strange ;-) > I just did a > ./MAKEALL mx31pdk from the current u-boot-arm master branch and it > builds fine, which I suspect sould not be possible if it missed the _end > symbol. The mx31pdk supports booting from NOR or from NAND, using two different configuration. You compiled for NOR, and everything works fine - only the nand_spl part has this issue. Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
