Hello Again Everyone! **Note:** This series depends on the OF_UPSTREAM work from Sumit [0]. Patch #11 was added to fix some Makefile.spl targets to allow SPL builds to complete with the OF_UPSTREAM series.
The AM62Px is an extension of the existing Sitara AM62x low-cost family of application processors built for Automotive and Linux Application development. Scalable Arm Cortex-A53 performance and embedded features, such as: multi high-definition display support, 3D-graphics acceleration, 4K video acceleration, and extensive peripherals make the AM62Px well-suited for a broad range of automation and industrial application, including automotive digital instrumentation, automotive displays, industrial HMI, and more. Some highlights of AM62P SoC are: * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. Dual/Single core variants are provided in the same package to allow HW compatible designs. * One Device manager Cortex-R5F for system power and resource management, and one Cortex-R5F for Functional Safety or general-purpose usage. * One 3D GPU up to 50 GLFOPS * H.264/H.265 Video Encode/Decode. * Display support: 3x display support over OLDI/LVDS (1x OLDI-DL, 1x or 2x OLDI-SL), DSI, or DPI. Up to 3840x1080 @ 60fps resolution * Integrated Giga-bit Ethernet switch supporting up to a total of two external ports (TSN capable). * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3xMMC and SD, GPMC for NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio, 1xCSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. * Dedicated Centralized Hardware Security Module with support for secure boot, debug security and crypto acceleration and trusted execution environment. * One 32-bit DDR Subsystem that supports LPDDR4, DDR4 memory types. * Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, enabling battery powered system design. For those interested, more details about this SoC can be found in the Technical Reference Manual here: https://www.ti.com/lit/pdf/spruj83 Proof-of-Life: https://paste.sr.ht/~bryanb/af2ac108a9362549aa326f182e87918d52bf2d71 Currently, while more peripherals are being added in Linux[0], this series will only support UART boot. Thanks for reviewing! ~Bryan Changes from v1: [1] - squashed all clk and lpsc tree updates into a single commit - corrected SOC_K3_AM642 typo with DM firmware Kconfig option - updated RM configs and dma nodes to enable IP that need DMA - added the dtb targets to the dts/Makefile - rebased the series on top of v2024.01-rc1 - switched to bootstd rather than use distro boot scripts. - enabled OF_UPSTREAM instead of using the arch/arm/dts directory [0] https://lore.kernel.org/u-boot/20240110103547.719757-1-sumit.g...@linaro.org/ [1] https://lore.kernel.org/all/20231012230616.2101992-13...@ti.com/ Bryan Brattlof (11): soc: add info to identify the am62p SoC family power: domain: ti: use IS_ENABLED macro arm: mach-k3: am62px: introduce clock and device files for wkup spl ram: k3-ddrss: enable the am62ax's DDR controller for am62px arm: mach-k3: invert logic for split DM firmware config arch: mach-k3: introduce basic files to support the am62px SoC family board: ti: introduce basic board files for the am62px family arm: dts: introduce am62p5 uboot dts files Makefile: remove hardcoded device tree source directory configs: introduce configs needed for the am62px doc: board: ti: introduce am62px documentation Hari Nagalla (1): firmware: ti_sci_static_data: add static DMA channel data Vignesh Raghavendra (1): dma: ti: k3-udma: Add DMA PSIL mappings for AM62P and J722S Makefile | 18 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi | 2800 +++++++++++++++++ arch/arm/dts/k3-am62p-sk-binman.dtsi | 173 + arch/arm/dts/k3-am62p5-r5-sk.dts | 101 + arch/arm/dts/k3-am62p5-sk-u-boot.dtsi | 49 + arch/arm/mach-k3/Kconfig | 9 +- arch/arm/mach-k3/Makefile | 1 + arch/arm/mach-k3/am62p5_init.c | 280 ++ arch/arm/mach-k3/am62px/Kconfig | 32 + .../arm/mach-k3/include/mach/am62p_hardware.h | 83 + arch/arm/mach-k3/include/mach/am62p_spl.h | 49 + arch/arm/mach-k3/include/mach/hardware.h | 6 + arch/arm/mach-k3/include/mach/spl.h | 4 + arch/arm/mach-k3/r5/Makefile | 1 + arch/arm/mach-k3/r5/am62px/Makefile | 6 + arch/arm/mach-k3/r5/am62px/clk-data.c | 325 ++ arch/arm/mach-k3/r5/am62px/dev-data.c | 71 + board/ti/am62px/Kconfig | 26 + board/ti/am62px/MAINTAINERS | 9 + board/ti/am62px/Makefile | 7 + board/ti/am62px/am62px.env | 16 + board/ti/am62px/board-cfg.yaml | 37 + board/ti/am62px/evm.c | 29 + board/ti/am62px/pm-cfg.yaml | 12 + board/ti/am62px/rm-cfg.yaml | 987 ++++++ board/ti/am62px/sec-cfg.yaml | 378 +++ board/ti/am62px/tifs-rm-cfg.yaml | 879 ++++++ configs/am62px_evm_a53_defconfig | 178 ++ configs/am62px_evm_r5_defconfig | 137 + doc/board/ti/am62px_sk.rst | 289 ++ doc/board/ti/k3.rst | 1 + drivers/clk/ti/clk-k3.c | 6 + drivers/dma/ti/Makefile | 2 + drivers/dma/ti/k3-psil-am62p.c | 325 ++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 4 + drivers/firmware/ti_sci_static_data.h | 5 +- drivers/power/domain/ti-power-domain.c | 13 +- drivers/ram/Kconfig | 2 +- drivers/soc/soc_ti_k3.c | 3 + dts/arch/arm64/ti | 1 + include/configs/am62px_evm.h | 14 + include/k3-clk.h | 1 + include/k3-dev.h | 1 + scripts/Makefile.spl | 17 +- 46 files changed, 7374 insertions(+), 16 deletions(-) create mode 100644 arch/arm/dts/k3-am62p-ddr-lp4-50-1600.dtsi create mode 100644 arch/arm/dts/k3-am62p-sk-binman.dtsi create mode 100644 arch/arm/dts/k3-am62p5-r5-sk.dts create mode 100644 arch/arm/dts/k3-am62p5-sk-u-boot.dtsi create mode 100644 arch/arm/mach-k3/am62p5_init.c create mode 100644 arch/arm/mach-k3/am62px/Kconfig create mode 100644 arch/arm/mach-k3/include/mach/am62p_hardware.h create mode 100644 arch/arm/mach-k3/include/mach/am62p_spl.h create mode 100644 arch/arm/mach-k3/r5/am62px/Makefile create mode 100644 arch/arm/mach-k3/r5/am62px/clk-data.c create mode 100644 arch/arm/mach-k3/r5/am62px/dev-data.c create mode 100644 board/ti/am62px/Kconfig create mode 100644 board/ti/am62px/MAINTAINERS create mode 100644 board/ti/am62px/Makefile create mode 100644 board/ti/am62px/am62px.env create mode 100644 board/ti/am62px/board-cfg.yaml create mode 100644 board/ti/am62px/evm.c create mode 100644 board/ti/am62px/pm-cfg.yaml create mode 100644 board/ti/am62px/rm-cfg.yaml create mode 100644 board/ti/am62px/sec-cfg.yaml create mode 100644 board/ti/am62px/tifs-rm-cfg.yaml create mode 100644 configs/am62px_evm_a53_defconfig create mode 100644 configs/am62px_evm_r5_defconfig create mode 100644 doc/board/ti/am62px_sk.rst create mode 100644 drivers/dma/ti/k3-psil-am62p.c create mode 120000 dts/arch/arm64/ti create mode 100644 include/configs/am62px_evm.h base-commit: b6d8969bcb94321dfed1399f2eaa8768ba42caaa prerequisite-patch-id: a2fa61937f80658611e0a2cdf88a11a6214b3645 prerequisite-patch-id: 1a31af706136646f62e98e88919802b1379feb39 prerequisite-patch-id: 54b40f9e042ef51755b4fb33ba6f8c4f6af9c17f prerequisite-patch-id: d2199c72fa11aea6e478f5a846f8ad786b0afc38 prerequisite-patch-id: 00e954105cf966b9527bb6ea11373e3da2d4c26d prerequisite-patch-id: bb58fb490183bfd836c492ec18590d9ec3b97457 prerequisite-patch-id: 99cb64427f3b8b401f32cd1d4cc68cd74aaa8733 prerequisite-patch-id: c461c9afad63446e824d00017c5faab7860de0e9 prerequisite-patch-id: fdc8c1c111e6329345f0b5c7609f2751e542d2fa prerequisite-patch-id: e07cf9612f806d28af7628573d73fefdd4144e63 prerequisite-patch-id: 15ee392282a7e0d2b99bcf9cded71f965fc32a5b prerequisite-patch-id: 91cdc33aa65dd1d205fb8fea5de2980fe2ab2f62 -- 2.43.0
