[U-Boot] [PATCH 1/3] OMAP3: Change some USB related MUX settings to values used by the kernel.

[Alexander Holler]

Signed-off-by: Alexander Holler <hol...@ahsoftware.de>
---
 board/ti/beagle/beagle.h |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index b22b653..abb69e7 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -273,18 +273,18 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(MCSPI1_CS1),         (IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
        MUX_VAL(CP(MCSPI1_CS2),         (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
  /* USB EHCI (port 2) */\
-       MUX_VAL(CP(MCSPI1_CS3),         (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA2*/\
-       MUX_VAL(CP(MCSPI2_CLK),         (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA7*/\
-       MUX_VAL(CP(MCSPI2_SIMO),        (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA4*/\
-       MUX_VAL(CP(MCSPI2_SOMI),        (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA5*/\
-       MUX_VAL(CP(MCSPI2_CS0),         (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA6*/\
-       MUX_VAL(CP(MCSPI2_CS1),         (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA3*/\
-       MUX_VAL(CP(ETK_D10_ES2),        (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
-       MUX_VAL(CP(ETK_D11_ES2),        (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
-       MUX_VAL(CP(ETK_D12_ES2),        (IEN  | PTU | DIS | M3)) /*HSUSB2_DIR*/\
-       MUX_VAL(CP(ETK_D13_ES2),        (IEN  | PTU | DIS | M3)) /*HSUSB2_NXT*/\
-       MUX_VAL(CP(ETK_D14_ES2),        (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA0*/\
-       MUX_VAL(CP(ETK_D15_ES2),        (IEN  | PTU | DIS | M3)) 
/*HSUSB2_DATA1*/\
+       MUX_VAL(CP(MCSPI1_CS3),         (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA2*/\
+       MUX_VAL(CP(MCSPI2_CLK),         (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA7*/\
+       MUX_VAL(CP(MCSPI2_SIMO),        (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA4*/\
+       MUX_VAL(CP(MCSPI2_SOMI),        (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA5*/\
+       MUX_VAL(CP(MCSPI2_CS0),         (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA6*/\
+       MUX_VAL(CP(MCSPI2_CS1),         (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA3*/\
+       MUX_VAL(CP(ETK_D10_ES2),        (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
+       MUX_VAL(CP(ETK_D11_ES2),        (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
+       MUX_VAL(CP(ETK_D12_ES2),        (IEN  | PTD | EN  | M3)) /*HSUSB2_DIR*/\
+       MUX_VAL(CP(ETK_D13_ES2),        (IEN  | PTD | EN  | M3)) /*HSUSB2_NXT*/\
+       MUX_VAL(CP(ETK_D14_ES2),        (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA0*/\
+       MUX_VAL(CP(ETK_D15_ES2),        (IEN  | PTD | EN  | M3)) 
/*HSUSB2_DATA1*/\
  /*Control and debug */\
        MUX_VAL(CP(SYS_32K),            (IEN  | PTD | DIS | M0)) /*SYS_32K*/\
        MUX_VAL(CP(SYS_CLKREQ),         (IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
@@ -383,7 +383,8 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(MCBSP3_CLKX),        (IEN  | PTD | DIS | M4)) /*GPIO_141*/\
        MUX_VAL(CP(UART2_CTS),          (IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
        MUX_VAL(CP(UART2_RTS),          (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
-       MUX_VAL(CP(UART2_TX),           (IDIS | PTD | DIS | M0)) /*UART2_TX*/
+       MUX_VAL(CP(UART2_TX),           (IDIS | PTD | DIS | M0)) /*UART2_TX*/\
+       MUX_VAL(CP(UART2_RX),           (IDIS | PTU | EN  | M4)) /*GPIO_147*/
 
 #define MUX_BEAGLE_XM() \
        MUX_VAL(CP(GPMC_NCS5),          (IDIS | PTD | EN  | M4)) /*GPIO_56*/\
-- 
1.7.3.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot