From: Romain Naour <romain.na...@skf.com> Clock names has been updated in kernel 5.19+ with the removal of non-standard node names [1]. Due to this change, ft_opp_clock_fixups() doesn't work anymore since ft_fixup_clocks() is looking to the clock name and ft_opp_clock_fixups() error out with the following message:
ft_fixup_clocks failed for DSP voltage domain: <valid offset/length> We can't use the new clock name since several clock are using the same generic name "clock". ft_opp_clock_fixups() is looking at the clocks node in cm_core_aon@0: /sys/firmware/devicetree/base/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks ... clock@120 clock@160 clock@1a0 clock@1e0 clock@210 clock@234 clock@284 clock@2a8 clock@2d8 When fdt_subnode_offset() fail, we can look at clock-output-names property as fallback since it contain the previous clock name. libfdt doesn't provide any support to replace fdt_subnode_offset() by a new function looking for clock-output-names property instead of the node name. So we have to implement it in arch/arm/mach-omap2/omap5/fdt.c for now. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e4920169e7a2a839836d3a0d8cda1bae8caa3056 Cc: Suman Anna <s-a...@ti.com> Cc: Tom Rini <tr...@konsulko.com> Cc: Andrew Davis <a...@ti.com> Signed-off-by: Romain Naour <romain.na...@skf.com> --- arch/arm/mach-omap2/omap5/fdt.c | 37 +++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap5/fdt.c b/arch/arm/mach-omap2/omap5/fdt.c index a8c301c6c28..0ca02e664c4 100644 --- a/arch/arm/mach-omap2/omap5/fdt.c +++ b/arch/arm/mach-omap2/omap5/fdt.c @@ -206,9 +206,28 @@ u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = { {1064000000, 532000000}, /* OPP_HIGH */ }; +static int fdt_clock_output_name_eq_(const void *fdt, int offset, + const char *s, int len) +{ + int olen; + const char *p = fdt_getprop(fdt, offset, "clock-output-names", &olen); + + if (!p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else + return 0; +} + static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num) { - int offs, node_offs, ret, i; + int offs, node_offs, subnode, ret, i; uint32_t phandle; offs = fdt_path_offset(fdt, "/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks"); @@ -223,9 +242,19 @@ static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num) for (i = 0; i < num; i++) { node_offs = fdt_subnode_offset(fdt, offs, names[i]); if (node_offs < 0) { - debug("Could not find clock sub-node %s: %s\n", - names[i], fdt_strerror(node_offs)); - return offs; + for (subnode = fdt_first_subnode(fdt, offs); + subnode >= 0; + subnode = fdt_next_subnode(fdt, subnode)) { + ret = fdt_clock_output_name_eq_(fdt, subnode, names[i], + strlen(names[i])); + if (ret) + node_offs = subnode; + } + if (node_offs < 0) { + debug("Could not find clock sub-node %s: %s\n", + names[i], fdt_strerror(node_offs)); + return offs; + } } phandle = fdt_get_phandle(fdt, node_offs); -- 2.43.0
