From: Kishon Vijay Abraham I <kis...@ti.com> Enable config options needed to support Ethernet boot on AM62x SK.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> --- configs/am62x_evm_a53_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig index aa96c1b312..5c56b17a3e 100644 --- a/configs/am62x_evm_a53_defconfig +++ b/configs/am62x_evm_a53_defconfig @@ -17,6 +17,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_SIZE_LIMIT=0x40000 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800 @@ -37,13 +38,19 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80c80000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 +CONFIG_SPL_DMA=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_ETH=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y +CONFIG_SPL_NET=y +CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL" CONFIG_SPL_POWER_DOMAIN=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y @@ -61,6 +68,7 @@ CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y -- 2.34.1
