On 2023-12-22 12:33, Ivan T. Ivanov wrote:
On 12-22 12:19, Marc Zyngier wrote:
Hi Ivan,
On 2023-12-18 21:03, Ivan T. Ivanov wrote:
> Hi,
>
> These patches are adding basic support for RPi5.
> They are based on v2 series from Dmitry Malkin[1].
>
> With them I am able to _start_ current openSUSE
> Tumbleweed without modification. They are still
> a lot of things to be added to the upstream Linux
> before it runs flawlessly on this device, but at
> least in U-Booot SD controller used for uSD card
> and Frameboffer and HDMI0 devices are working fine
> now. It seems that PCIe controller is working fine
> too, but I have not tested it too much.
>
> Serial console and reset are also functional.
>
> Hopefully this will help others add missing pieces
> more easily.
So I've given this a go, and the basics (serial) worked
out of the box (thanks for that!) after performing the
memory-map change you described in your reply to patch 1.
However, I don't get anything on the PCIe front:
U-Boot> pci enum
PCIe BRCM: link down
PCIe BRCM: link down
despite having an nvme device connected and enabled
(the RPi kernel finds it).
I'm guessing I must be missing something. How did you
test PCIe?
No, you are not missing anything. I have not tested it
for real. That is why I said "it seems". Sorry.
Yesterday I started looking more closely at what's missing
and unfortunately a lot more changes are needed.
Ah, fair enough. I was slightly surprised that it appeared
to be working out of the box, which would have been a first
on the ARM side...
Happy to test whatever patches you come up with!
Thanks,
M.
--
Jazz is not dead. It just smells funny...
