From: Julian Pidancet <julian.pidan...@citrix.com>
This patch renames openrd_base to openrd in order to add support for
other boards of the OpenRD family in future commits. The openrd_base
board name remain in use.
Signed-off-by: Julian Pidancet <julian.pidan...@citrix.com>
rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (97%)
rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (95%)
create mode 100644 include/configs/openrd.h
diff --git a/board/Marvell/openrd_base/Makefile b/board/Marvell/openrd/Makefile
similarity index 98%
rename from board/Marvell/openrd_base/Makefile
rename to board/Marvell/openrd/Makefile
index d6d0ed3..19020e4 100644
--- a/board/Marvell/openrd_base/Makefile
+++ b/board/Marvell/openrd/Makefile
@@ -31,7 +31,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := openrd_base.o
+COBJS := openrd.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/Marvell/openrd_base/kwbimage.cfg
b/board/Marvell/openrd/kwbimage.cfg
similarity index 100%
rename from board/Marvell/openrd_base/kwbimage.cfg
rename to board/Marvell/openrd/kwbimage.cfg
diff --git a/board/Marvell/openrd_base/openrd_base.c
b/board/Marvell/openrd/openrd.c
similarity index 97%
rename from board/Marvell/openrd_base/openrd_base.c
rename to board/Marvell/openrd/openrd.c
index 10109c1..b395df7 100644
--- a/board/Marvell/openrd_base/openrd_base.c
+++ b/board/Marvell/openrd/openrd.c
@@ -31,7 +31,7 @@
#include <miiphy.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
-#include "openrd_base.h"
+#include "openrd.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -110,7 +110,7 @@ int board_init(void)
/*
* arch number of board
*/
- gd->bd->bi_arch_number = MACH_TYPE_OPENRD_BASE;
+ gd->bd->bi_arch_number = MACH_TYPE_OPENRD;
/* adress of boot parameters */
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
diff --git a/board/Marvell/openrd_base/openrd_base.h
b/board/Marvell/openrd/openrd.h
similarity index 95%
rename from board/Marvell/openrd_base/openrd_base.h
rename to board/Marvell/openrd/openrd.h
index f3daf17..638d2ff 100644
--- a/board/Marvell/openrd_base/openrd_base.h
+++ b/board/Marvell/openrd/openrd.h
@@ -27,8 +27,8 @@
* MA 02110-1301 USA
*/
-#ifndef __OPENRD_BASE_H
-#define __OPENRD_BASE_H
+#ifndef __OPENRD_H
+#define __OPENRD_H
#define OPENRD_OE_LOW (~(1<<28)) /* RS232 / RS485 */
#define OPENRD_OE_HIGH (~(1<<2)) /* SD / UART1 */
@@ -43,4 +43,4 @@
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-#endif /* __OPENRD_BASE_H */
+#endif /* __OPENRD_H */
diff --git a/boards.cfg b/boards.cfg
index 45c3102..07c904b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -96,7 +96,7 @@ davinci_sonata arm arm926ejs sonata
davinci
suen3 arm arm926ejs km_arm
keymile kirkwood
guruplug arm arm926ejs -
Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs -
Marvell kirkwood
-openrd_base arm arm926ejs -
Marvell kirkwood
+openrd_base arm arm926ejs openrd
Marvell kirkwood
rd6281a arm arm926ejs -
Marvell kirkwood
sheevaplug arm arm926ejs -
Marvell kirkwood
dockstar arm arm926ejs -
Seagate kirkwood
diff --git a/include/configs/openrd.h b/include/configs/openrd.h
new file mode 100644
index 0000000..d7973dc
--- /dev/null
+++ b/include/configs/openrd.h
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2009
+ * Net Insight <www.netinsight.net>
+ * Written-by: Simon Kagstrom <simon.kagst...@netinsight.net>
+ *
+ * Based on sheevaplug.h:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_OPENRD_H
+#define _CONFIG_OPENRD_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_MACH_OPENRD /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0x60000
+#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
+ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
+ "${x_bootcmd_usb}; bootm 0x6400000;"
+
+#define MTDIDS_DEFAULT "nand0=nand_mtd"
+#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
+ "0x400000@0x100000(uImage),"\
+ "0x1fb00000@0x500000(rootfs)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
+ "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
+ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
+ "x_bootcmd_usb=usb start\0" \
+ "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
+ "mtdids="MTDIDS_DEFAULT"\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0"
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+#endif /* _CONFIG_OPENRD_H */
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index cfdd09c..136d3bf 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -30,91 +30,24 @@
#ifndef _CONFIG_OPENRD_BASE_H
#define _CONFIG_OPENRD_BASE_H
+#include <configs/openrd.h>
+
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nOpenRD_base"
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
-#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_MACH_OPENRD_BASE /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-/*
- * Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-#endif
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-#define CONFIG_ENV_SIZE 0x20000 /* 128k */
-#define CONFIG_ENV_ADDR 0x60000
-#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
- "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
- "${x_bootcmd_usb}; bootm 0x6400000;"
-
-#define MTDIDS_DEFAULT "nand0=nand_mtd"
-#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
- "0x400000@0x100000(uImage),"\
- "0x1fb00000@0x500000(rootfs)"
-
-#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
- "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
- "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
- "x_bootcmd_usb=usb start\0" \
- "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
- "mtdids="MTDIDS_DEFAULT"\0" \
- "mtdparts="MTDPARTS_DEFAULT"\0"
+/* Machine type */
+#define MACH_TYPE_OPENRD MACH_TYPE_OPENRD_BASE
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR 0x8
+/* enable port 0 only */
+#define CONFIG_MVGBE_PORTS {1, 0}
+#define CONFIG_PHY_BASE_ADR 0x8
+#define PHY_NO "88E1116"
#endif /* CONFIG_CMD_NET */
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
#endif /* _CONFIG_OPENRD_BASE_H */
--
Julian Pidancet
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
