Hi
On Wed, Nov 15, 2023 at 11:37 AM Leto, Enrico <enrico.l...@siemens.com> wrote:
>
> Patch is working by me.
>
> > -----Original Message-----
> > From: Heiko Schocher <h...@denx.de>
> > Sent: Wednesday, November 15, 2023 6:41 AM
> > To: U-Boot Mailing List <u-boot@lists.denx.de>; Leto, Enrico (SI BP R&D ZG
> > FW
> > CCP) <enrico.l...@siemens.com>
> > Cc: Schocher, Heiko (EXT) (DENX Software Engineering GmbH) <h...@denx.de>;
> > Dario Binacchi <dario.binac...@amarulasolutions.com>; Michael Trimarchi
> > <mich...@amarulasolutions.com>
> > Subject: [PATCH] mtd: rawnand: omap_gpmc: fix BCH8 HW based correction
> >
> > commit 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based
> > correction")
> >
> > broke AM335x based boards booting from NAND with ECC BCH8 code.
> >
> > Use omap_enable_hwecc() instead of omap_enable_hwecc_bch() in SPL
> > restores correct SPL nand_read_page functionality.
> >
> > Tested on draco thuban board.
> >
> > Signed-off-by: Heiko Schocher <h...@denx.de>
> >
> > ---
> > fix NAND boot for BCH8 based TI AM335x boards
> >
> > Fix is based on series from Enrico:
> >
We need test the boards that Roger add here.
Michael
> > https://lists.d/
> > enx.de%2Fpipermail%2Fu-boot%2F2023-
> > November%2F536793.html&data=05%7C01%7Cenrico.leto%40siemens.com
> > %7Cbd939f15167c49cc97b708dbe59d6e9e%7C38ae3bcd95794fd4addab4
> > 2e1495d55a%7C1%7C0%7C638356236545245361%7CUnknown%7CTWFp
> > bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXV
> > CI6Mn0%3D%7C3000%7C%7C%7C&sdata=IUqjryYUtp%2Fdm9GgCALPTl8f%
> > 2BlcrO0ErXjkvoDwz7v4%3D&reserved=0
> >
> > and fixes NAND boot for the draco thuban board. But this patch apply also
> > without the patches from above patchseries, see azure build:
> >
> > https://dev.a/
> > zure.com%2Fhs0298%2Fhs%2F_build%2Fresults%3FbuildId%3D111%26vie
> > w%3Dresults&data=05%7C01%7Cenrico.leto%40siemens.com%7Cbd939f15
> > 167c49cc97b708dbe59d6e9e%7C38ae3bcd95794fd4addab42e1495d55a%
> > 7C1%7C0%7C638356236545245361%7CUnknown%7CTWFpbGZsb3d8eyJ
> > WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
> > %7C3000%7C%7C%7C&sdata=S2itRHsR49lD9TlBexYw9J5waXiuFcS%2BhUp
> > %2B7Yi60MA%3D&reserved=0
> >
> > which is clean.
> >
> > Above commit seems to change only U-Boot code and did not adapt
> > am335x_spl_bch.c, which breaks nand_read_page in SPL code for AM335x
> > based boards. So use in SPL "old" hw setup and reading page from NAND in
> > SPL works again.
> >
> >
> > drivers/mtd/nand/raw/omap_gpmc.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/mtd/nand/raw/omap_gpmc.c
> > b/drivers/mtd/nand/raw/omap_gpmc.c
> > index 1a5ed0de31..c9b66dadbd 100644
> > --- a/drivers/mtd/nand/raw/omap_gpmc.c
> > +++ b/drivers/mtd/nand/raw/omap_gpmc.c
> > @@ -983,7 +983,11 @@ static int omap_select_ecc_scheme(struct
> > nand_chip *nand,
> > nand->ecc.strength = 8;
> > nand->ecc.size = SECTOR_BYTES;
> > nand->ecc.bytes = 14;
> > +#if defined(CONFIG_SPL_BUILD)
> > + nand->ecc.hwctl = omap_enable_hwecc;
> > +#else
> > nand->ecc.hwctl = omap_enable_hwecc_bch;
> > +#endif
> > nand->ecc.correct = omap_correct_data_bch;
> > nand->ecc.calculate = omap_calculate_ecc_bch;
> > nand->ecc.read_page = omap_read_page_bch;
> > --
> > 2.37.3
>
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
mich...@amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
i...@amarulasolutions.com
www.amarulasolutions.com
