Works now. I used T1042D4RDB_SDCARD_defconfig.
relocate_code in arch/powerpc/cpu/mpc85xx/start.o before patch (non-SPL build):
00000dc0 <relocate_code>:
dc0: 7c 61 1b 78 mr r1,r3
dc4: 7c 89 23 78 mr r9,r4
dc8: 7c aa 2b 78 mr r10,r5
dcc: 48 00 00 05 bl dd0 <relocate_code+0x10>
dd0: 7d 88 02 a6 mflr r12
dd4: 80 0c 01 fc lwz r0,508(r12)
dd8: 7d 80 62 14 add r12,r0,r12
00000ddc <in_ram>:
...
After Patch:
00000dc0 <relocate_code>:
dc0: 7c 61 1b 78 mr r1,r3
dc4: 7c 89 23 78 mr r9,r4
dc8: 7c aa 2b 78 mr r10,r5
dcc: 48 00 00 05 bl dd0 <relocate_code+0x10>
dd0: 7d 88 02 a6 mflr r12
dd4: 80 0c 02 c8 lwz r0,712(r12)
dd8: 7d 80 62 14 add r12,r0,r12
...
ea0: 7c 08 03 a6 mtlr r0
ea4: 4e 80 00 20 blr
00000ea8 <in_ram>:
...
In SPL build, relocate_code is same in both builds (because of
CONFIG_SPL_SKIP_RELOCATE).
On 28.10.2023 15:26, Tom Rini wrote:
> On Fri, Oct 20, 2023 at 01:06:55AM +0200, Martin Fäcknitz wrote:
>
>> When building a non-SPL image, relocation is needed. This patch restores
>> the old behaviour before commit b35316fb67: CONFIG_SPL_SKIP_RELOCATE was
>> only defined if CONFIG_SPL_BUILD was defined.
>>
>> Fixes: b35316fb67cb ("Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig")
>> Signed-off-by: Martin Fäcknitz <faeckn...@hotsplots.de>
>
> This is now applied to u-boot/master, thanks! But also, can you please
> confirm that top of tree now works for you, and which defconfig that is?
> As part of my testing I check for size changes before/after and this
> doesn't change any platform, which would lead to how I had missed the
> problem during the conversion.
>
