Hi Marcel, On Tue, Oct 24, 2023 at 10:16 AM Marcel Ziswiler <marcel.ziswi...@toradex.com> wrote:
> Yes, regular eMMC boot. Serial download also works for me (note this requires > a patch still not merged upstream I tried the top of tree U-Boot on the imx8mp-evk and I was not able to reproduce the error here. Below is the boot log from the SD card: U-Boot SPL 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300) SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) Trying to boot from BOOTROM Boot Stage: Primary boot image offset 0x8000, pagesize 0x200, ivt offset 0x0 NOTICE: BL31: v2.6(release):lf-6.1.1-1.0.0-0-g616a4588f333 NOTICE: BL31: Built : 10:38:04, Oct 12 2023 U-Boot 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300) CPU: Freescale i.MX8MP[8] rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB Core: 103 devices, 26 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@30890000 Out: serial@30890000 Err: serial@30890000 SEC0: RNG instantiated Net: Error: ethernet@30bf0000 address not set. Error: ethernet@30be0000 address not set. Could not get PHY for FEC0: addr 1 Error: ethernet@30bf0000 address not set. Error: ethernet@30bf0000 address not set. No ethernet found. Hit any key to stop autoboot: 0 u-boot=>
