At the moment all Allwinner DRAM initialisation routines are stored in arch/arm/mach-sunxi, even though those "drivers" are just a giant collection of writel's, without any architectural dependency.
The R528/T113-s SoC (with ARM cores) and the D1/D1s Soc (with RISC-V cores) share the same die, so should share the same DRAM init routines as well. To prepare for this, add a new sunxi directory inside drivers/ram, and add some stub entries to prepare for the addition of the share DRAM code for those SoCs. The RISC-V D1(s) SoCs will probably use SPL_DM, so for that SoC this would be the right directory anyway. Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- drivers/ram/Kconfig | 3 ++- drivers/ram/sunxi/Kconfig | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-) create mode 100644 drivers/ram/sunxi/Kconfig diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index bf999645774..5b07e920301 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -109,8 +109,9 @@ config IMXRT_SDRAM source "drivers/ram/aspeed/Kconfig" source "drivers/ram/cadence/Kconfig" +source "drivers/ram/octeon/Kconfig" source "drivers/ram/rockchip/Kconfig" source "drivers/ram/sifive/Kconfig" source "drivers/ram/stm32mp1/Kconfig" -source "drivers/ram/octeon/Kconfig" source "drivers/ram/starfive/Kconfig" +source "drivers/ram/sunxi/Kconfig" diff --git a/drivers/ram/sunxi/Kconfig b/drivers/ram/sunxi/Kconfig new file mode 100644 index 00000000000..d7cf84c39a3 --- /dev/null +++ b/drivers/ram/sunxi/Kconfig @@ -0,0 +1,6 @@ +config DRAM_SUN20I_D1 + bool + depends on ARCH_SUNXI + help + This enables support for the DRAM controller driver covering + the Allwinner D1/R528/T113s SoCs. -- 2.25.1
