Dear Kumar Gala, In message <alpine.lfd.2.00.1103140036490.3...@right.am.freescale.net> you wrote: > A few fixes for v2011.03 release. > > The following changes since commit c7977858dcf1f656cbe91ea0dc3cb9139c6a8cc8: > > ARM: Update mach-types (2011-02-21 08:30:55 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-mpc85xx.git master > > Ed Swarthout (1): > powerpc/85xx: Fix plat_mp_up() disabling of BPTR for CoreNet Platforms > > John Schmoller (1): > mpc8[5/6]xx: Ensure POST word does not get reset > > Kumar Gala (1): > fsl_law: Fix LAW printing function > > Matthew McClintock (1): > powerpc/85xx: Fix pixis_reset altbank mask on MPC8536DS > > Priyanka Jain (1): > fsl_esdhc: Correcting esdhc timeout counter calculation > > York Sun (3): > powerpc/mpc8xxx: Fix DDR3 timing_cfg_1 and sdram_mode registers > corenet_ds: pick the middle value for all tested timing parameters > powerpc/corenet_ds: revise platform dependent parameters > > arch/powerpc/cpu/mpc85xx/interrupts.c | 16 ++++++++ > arch/powerpc/cpu/mpc85xx/mp.c | 4 +- > arch/powerpc/cpu/mpc86xx/interrupts.c | 16 ++++++++ > arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 20 +++++++--- > board/freescale/corenet_ds/ddr.c | 58 +++++++++-------------------- > drivers/misc/fsl_law.c | 2 +- > drivers/mmc/fsl_esdhc.c | 16 ++++++++- > include/configs/MPC8536DS.h | 2 +- > 8 files changed, 83 insertions(+), 51 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "It takes all sorts of in & out-door schooling to get adapted to my kind of fooling" - R. Frost _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot