Hi all, this is v4 of the Conclusive KSTR-SAMA5D27 support series.
Patch [1/4] now reverts to the approach found in v2. Simon, while the behavior is now identical to the one from v2, I retained the serial_read_from_eeprom() function name from v3 (it makes it more consistent with the existing mac_read_from_eeprom()). Because of that, I refrained from copying your v2 Reviewed-by tag. Patch [2/4] is new. It introduces a new event, intended to be called post-relocation and before console init. As a result, [v3 2/4] patch gets dropped in favor of this much simpler solution (see [4/4] below for use case). Patch [3/4] remains unchanged. Patch [4/4] makes use of the newly introduced EVT_SETTINGS_R, utilizing it for EEPROM readout of MAC and board serial number settings. Artur Rojek (4): common: add prototype & rename populate_serial_number() event: add new EVT_SETTINGS_R event arm: dts: at91: sama5: Add flexcom4 node board: Add support for Conclusive KSTR-SAMA5D27 arch/arm/dts/Makefile | 3 + arch/arm/dts/at91-kstr-sama5d27.dts | 131 ++++++++++ arch/arm/dts/sama5d2.dtsi | 20 ++ arch/arm/mach-at91/Kconfig | 12 + board/conclusive/kstr-sama5d27/Kconfig | 15 ++ board/conclusive/kstr-sama5d27/MAINTAINERS | 8 + board/conclusive/kstr-sama5d27/Makefile | 5 + .../conclusive/kstr-sama5d27/kstr-sama5d27.c | 239 ++++++++++++++++++ cmd/tlv_eeprom.c | 14 +- common/board_r.c | 1 + common/event.c | 1 + configs/kstr_sama5d27_defconfig | 73 ++++++ include/configs/kstr-sama5d27.h | 15 ++ include/event.h | 9 + include/init.h | 14 + 15 files changed, 547 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/at91-kstr-sama5d27.dts create mode 100644 board/conclusive/kstr-sama5d27/Kconfig create mode 100644 board/conclusive/kstr-sama5d27/MAINTAINERS create mode 100644 board/conclusive/kstr-sama5d27/Makefile create mode 100644 board/conclusive/kstr-sama5d27/kstr-sama5d27.c create mode 100644 configs/kstr_sama5d27_defconfig create mode 100644 include/configs/kstr-sama5d27.h -- 2.42.0
