Use arm-gic.h and irq.h for interrupt description. It helps to improve
readability of device tree file.

Suggested-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Signed-off-by: Michal Simek <michal.si...@amd.com>
---

 arch/arm/dts/zynqmp.dtsi | 184 +++++++++++++++++++++++----------------
 1 file changed, 110 insertions(+), 74 deletions(-)

diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8d3501018455..951f3f795e97 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -14,6 +14,8 @@
 
 #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/power/xlnx-zynqmp-power.h>
 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
@@ -122,7 +124,7 @@
                bootph-all;
                compatible = "xlnx,zynqmp-ipi-mailbox";
                interrupt-parent = <&gic>;
-               interrupts = <0 35 4>;
+               interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
                xlnx,ipi-id = <0>;
                #address-cells = <2>;
                #size-cells = <2>;
@@ -152,10 +154,10 @@
        pmu {
                compatible = "arm,armv8-pmuv3";
                interrupt-parent = <&gic>;
-               interrupts = <0 143 4>,
-                            <0 144 4>,
-                            <0 145 4>,
-                            <0 146 4>;
+               interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-affinity = <&cpu0>,
                                     <&cpu1>,
                                     <&cpu2>,
@@ -183,7 +185,7 @@
                                bootph-all;
                                compatible = "xlnx,zynqmp-power";
                                interrupt-parent = <&gic>;
-                               interrupts = <0 35 4>;
+                               interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
                                mboxes = <&ipi_mailbox_pmu1 0>, 
<&ipi_mailbox_pmu1 1>;
                                mbox-names = "tx", "rx";
                        };
@@ -227,10 +229,10 @@
        timer {
                compatible = "arm,armv8-timer";
                interrupt-parent = <&gic>;
-               interrupts = <1 13 0xf08>,
-                            <1 14 0xf08>,
-                            <1 11 0xf08>,
-                            <1 10 0xf08>;
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
        };
 
        edac {
@@ -258,7 +260,7 @@
                        status = "disabled";
                        clock-names = "can_clk", "pclk";
                        reg = <0x0 0xff060000 0x0 0x1000>;
-                       interrupts = <0 23 4>;
+                       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-parent = <&gic>;
                        tx-fifo-depth = <0x40>;
                        rx-fifo-depth = <0x40>;
@@ -271,7 +273,7 @@
                        status = "disabled";
                        clock-names = "can_clk", "pclk";
                        reg = <0x0 0xff070000 0x0 0x1000>;
-                       interrupts = <0 24 4>;
+                       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-parent = <&gic>;
                        tx-fifo-depth = <0x40>;
                        rx-fifo-depth = <0x40>;
@@ -291,11 +293,11 @@
                                compatible = "arm,cci-400-pmu,r1";
                                reg = <0x9000 0x5000>;
                                interrupt-parent = <&gic>;
-                               interrupts = <0 123 4>,
-                                            <0 123 4>,
-                                            <0 123 4>,
-                                            <0 123 4>,
-                                            <0 123 4>;
+                               interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
                        };
                };
 
@@ -305,7 +307,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd500000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 124 4>;
+                       interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -318,7 +320,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd510000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 125 4>;
+                       interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -331,7 +333,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd520000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 126 4>;
+                       interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -344,7 +346,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd530000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 127 4>;
+                       interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -357,7 +359,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd540000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 128 4>;
+                       interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -370,7 +372,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd550000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 129 4>;
+                       interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -383,7 +385,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd560000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 130 4>;
+                       interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -396,7 +398,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xfd570000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 131 4>;
+                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <128>;
@@ -413,7 +415,7 @@
                              <0x0 0xf9060000 0x0 0x20000>;
                        interrupt-controller;
                        interrupt-parent = <&gic>;
-                       interrupts = <1 9 0xf04>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>;
                };
 
                gpu: gpu@fd4b0000 {
@@ -421,7 +423,12 @@
                        compatible = "xlnx,zynqmp-mali", "arm,mali-400";
                        reg = <0x0 0xfd4b0000 0x0 0x10000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 
4>, <0 132 4>, <0 132 4>;
+                       interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", 
"pp1", "ppmmu1";
                        clock-names = "bus", "core";
                        power-domains = <&zynqmp_firmware PD_GPU>;
@@ -436,7 +443,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffa80000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 77 4>;
+                       interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -449,7 +456,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffa90000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 78 4>;
+                       interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -462,7 +469,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffaa0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 79 4>;
+                       interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -475,7 +482,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffab0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 80 4>;
+                       interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -488,7 +495,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffac0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 81 4>;
+                       interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -501,7 +508,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffad0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 82 4>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -514,7 +521,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffae0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 83 4>;
+                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -527,7 +534,7 @@
                        compatible = "xlnx,zynqmp-dma-1.0";
                        reg = <0x0 0xffaf0000 0x0 0x1000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 84 4>;
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
                        clock-names = "clk_main", "clk_apb";
                        #dma-cells = <1>;
                        xlnx,bus-width = <64>;
@@ -539,7 +546,7 @@
                        compatible = "xlnx,zynqmp-ddrc-2.40a";
                        reg = <0x0 0xfd070000 0x0 0x30000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 112 4>;
+                       interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                nand0: nand-controller@ff100000 {
@@ -548,7 +555,7 @@
                        reg = <0x0 0xff100000 0x0 0x1000>;
                        clock-names = "controller", "bus";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 14 4>;
+                       interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        iommus = <&smmu 0x872>;
@@ -559,7 +566,8 @@
                        compatible = "xlnx,zynqmp-gem", "cdns,gem";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 57 4>, <0 57 4>;
+                       interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff0b0000 0x0 0x1000>;
                        clock-names = "pclk", "hclk", "tx_clk", "rx_clk", 
"tsu_clk";
                        #address-cells = <1>;
@@ -574,7 +582,8 @@
                        compatible = "xlnx,zynqmp-gem", "cdns,gem";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 59 4>, <0 59 4>;
+                       interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff0c0000 0x0 0x1000>;
                        clock-names = "pclk", "hclk", "tx_clk", "rx_clk", 
"tsu_clk";
                        #address-cells = <1>;
@@ -589,7 +598,8 @@
                        compatible = "xlnx,zynqmp-gem", "cdns,gem";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 61 4>, <0 61 4>;
+                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff0d0000 0x0 0x1000>;
                        clock-names = "pclk", "hclk", "tx_clk", "rx_clk", 
"tsu_clk";
                        #address-cells = <1>;
@@ -604,7 +614,8 @@
                        compatible = "xlnx,zynqmp-gem", "cdns,gem";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 63 4>, <0 63 4>;
+                       interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff0e0000 0x0 0x1000>;
                        clock-names = "pclk", "hclk", "tx_clk", "rx_clk", 
"tsu_clk";
                        #address-cells = <1>;
@@ -621,7 +632,7 @@
                        #gpio-cells = <0x2>;
                        gpio-controller;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 16 4>;
+                       interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-controller;
                        #interrupt-cells = <2>;
                        reg = <0x0 0xff0a0000 0x0 0x1000>;
@@ -632,7 +643,7 @@
                        compatible = "cdns,i2c-r1p14";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 17 4>;
+                       interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <400000>;
                        reg = <0x0 0xff020000 0x0 0x1000>;
                        #address-cells = <1>;
@@ -644,7 +655,7 @@
                        compatible = "cdns,i2c-r1p14";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 18 4>;
+                       interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
                        clock-frequency = <400000>;
                        reg = <0x0 0xff030000 0x0 0x1000>;
                        #address-cells = <1>;
@@ -668,11 +679,11 @@
                        msi-controller;
                        device_type = "pci";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 118 4>,
-                                    <0 117 4>,
-                                    <0 116 4>,
-                                    <0 115 4>, /* MSI_1 [63...32] */
-                                    <0 114 4>; /* MSI_0 [31...0] */
+                       interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* 
MSI_1 [63...32] */
+                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* 
MSI_0 [31...0] */
                        interrupt-names = "misc", "dummy", "intx",
                                          "msi1", "msi0";
                        msi-parent = <&pcie>;
@@ -702,7 +713,7 @@
                        compatible = "xlnx,zynqmp-qspi-1.0";
                        status = "disabled";
                        clock-names = "ref_clk", "pclk";
-                       interrupts = <0 15 4>;
+                       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-parent = <&gic>;
                        num-cs = <1>;
                        reg = <0x0 0xff0f0000 0x0 0x1000>,
@@ -727,7 +738,8 @@
                        status = "disabled";
                        reg = <0x0 0xffa60000 0x0 0x100>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 26 4>, <0 27 4>;
+                       interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "alarm", "sec";
                        calibration = <0x7FFF>;
                };
@@ -737,7 +749,7 @@
                        status = "disabled";
                        reg = <0x0 0xfd0c0000 0x0 0x2000>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 133 4>;
+                       interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
                        power-domains = <&zynqmp_firmware PD_SATA>;
                        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
                        iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
@@ -750,7 +762,7 @@
                        compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 48 4>;
+                       interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff160000 0x0 0x1000>;
                        clock-names = "clk_xin", "clk_ahb";
                        iommus = <&smmu 0x870>;
@@ -765,7 +777,7 @@
                        compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 49 4>;
+                       interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff170000 0x0 0x1000>;
                        clock-names = "clk_xin", "clk_ahb";
                        iommus = <&smmu 0x871>;
@@ -782,18 +794,30 @@
                        status = "disabled";
                        #global-interrupts = <1>;
                        interrupt-parent = <&gic>;
-                       interrupts = <0 155 4>,
-                               <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-                               <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-                               <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-                               <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+                       interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                spi0: spi@ff040000 {
                        compatible = "cdns,spi-r1p6";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 19 4>;
+                       interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff040000 0x0 0x1000>;
                        clock-names = "ref_clk", "pclk";
                        #address-cells = <1>;
@@ -805,7 +829,7 @@
                        compatible = "cdns,spi-r1p6";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 20 4>;
+                       interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff050000 0x0 0x1000>;
                        clock-names = "ref_clk", "pclk";
                        #address-cells = <1>;
@@ -817,7 +841,9 @@
                        compatible = "cdns,ttc";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+                       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff110000 0x0 0x1000>;
                        timer-width = <32>;
                        power-domains = <&zynqmp_firmware PD_TTC_0>;
@@ -827,7 +853,9 @@
                        compatible = "cdns,ttc";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+                       interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff120000 0x0 0x1000>;
                        timer-width = <32>;
                        power-domains = <&zynqmp_firmware PD_TTC_1>;
@@ -837,7 +865,9 @@
                        compatible = "cdns,ttc";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+                       interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff130000 0x0 0x1000>;
                        timer-width = <32>;
                        power-domains = <&zynqmp_firmware PD_TTC_2>;
@@ -847,7 +877,9 @@
                        compatible = "cdns,ttc";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff140000 0x0 0x1000>;
                        timer-width = <32>;
                        power-domains = <&zynqmp_firmware PD_TTC_3>;
@@ -858,7 +890,7 @@
                        compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 21 4>;
+                       interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff000000 0x0 0x1000>;
                        clock-names = "uart_clk", "pclk";
                        power-domains = <&zynqmp_firmware PD_UART_0>;
@@ -869,7 +901,7 @@
                        compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 22 4>;
+                       interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xff010000 0x0 0x1000>;
                        clock-names = "uart_clk", "pclk";
                        power-domains = <&zynqmp_firmware PD_UART_1>;
@@ -896,7 +928,9 @@
                                reg = <0x0 0xfe200000 0x0 0x40000>;
                                interrupt-parent = <&gic>;
                                interrupt-names = "dwc_usb3", "otg", "hiber";
-                               interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
+                               interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
                                iommus = <&smmu 0x860>;
                                snps,quirk-frame-length-adjustment = <0x20>;
                                clock-names = "ref";
@@ -927,7 +961,9 @@
                                reg = <0x0 0xfe300000 0x0 0x40000>;
                                interrupt-parent = <&gic>;
                                interrupt-names = "dwc_usb3", "otg", "hiber";
-                               interrupts = <0 70 4>, <0 74 4>, <0 76 4>;
+                               interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
                                iommus = <&smmu 0x861>;
                                snps,quirk-frame-length-adjustment = <0x20>;
                                clock-names = "ref";
@@ -942,7 +978,7 @@
                        compatible = "cdns,wdt-r1p2";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 113 1>;
+                       interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
                        reg = <0x0 0xfd4d0000 0x0 0x1000>;
                        timeout-sec = <60>;
                        reset-on-timeout;
@@ -952,7 +988,7 @@
                        compatible = "cdns,wdt-r1p2";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 52 1>;
+                       interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
                        reg = <0x0 0xff150000 0x0 0x1000>;
                        timeout-sec = <10>;
                };
@@ -961,7 +997,7 @@
                        compatible = "xlnx,zynqmp-ams";
                        status = "disabled";
                        interrupt-parent = <&gic>;
-                       interrupts = <0 56 4>;
+                       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x0 0xffa50000 0x0 0x800>;
                        #address-cells = <1>;
                        #size-cells = <1>;
@@ -987,7 +1023,7 @@
                        compatible = "xlnx,zynqmp-dpdma";
                        status = "disabled";
                        reg = <0x0 0xfd4c0000 0x0 0x1000>;
-                       interrupts = <0 122 4>;
+                       interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-parent = <&gic>;
                        clock-names = "axi_clk";
                        power-domains = <&zynqmp_firmware PD_DP>;
@@ -1003,7 +1039,7 @@
                              <0x0 0xfd4ab000 0x0 0x1000>,
                              <0x0 0xfd4ac000 0x0 0x1000>;
                        reg-names = "dp", "blend", "av_buf", "aud";
-                       interrupts = <0 119 4>;
+                       interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-parent = <&gic>;
                        clock-names = "dp_apb_clk", "dp_aud_clk",
                                      "dp_vtc_pixel_clk_in";
-- 
2.36.1

Reply via email to