Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .
Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
---
arch/arm/dts/beacon-renesom-baseboard.dtsi | 45 ++++++++++++++--------
arch/arm/dts/beacon-renesom-som.dtsi | 2 +-
arch/arm/dts/hihope-common.dtsi | 21 ++++++++--
arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts | 21 ----------
arch/arm/dts/r8a774a1-u-boot.dtsi | 1 -
arch/arm/dts/r8a774a1.dtsi | 14 ++++---
6 files changed, 57 insertions(+), 47 deletions(-)
diff --git a/arch/arm/dts/beacon-renesom-baseboard.dtsi
b/arch/arm/dts/beacon-renesom-baseboard.dtsi
index 8166e3c1ff4..2e9927b9773 100644
--- a/arch/arm/dts/beacon-renesom-baseboard.dtsi
+++ b/arch/arm/dts/beacon-renesom-baseboard.dtsi
@@ -367,7 +367,7 @@
assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
<&versaclock6_bb 3>, <&versaclock6_bb 4>;
- assigned-clock-rates = <24000000>, <24000000>, <24000000>,
+ assigned-clock-rates = <24000000>, <24000000>, <24576000>,
<24576000>;
OUT1 {
@@ -437,20 +437,6 @@
};
};
- /* 0 - lcd_reset */
- /* 1 - lcd_pwr */
- /* 2 - lcd_select */
- /* 3 - backlight-enable */
- /* 4 - Touch_shdwn */
- /* 5 - LCD_H_pol */
- /* 6 - lcd_V_pol */
- gpio_exp1: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
@@ -482,6 +468,16 @@
};
};
};
+
+ gpio_exp1: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+ "backlight-enable", "Touch_shdwn",
+ "LCD_H_pol", "lcd_V_pol";
+ };
};
&lvds0 {
@@ -638,6 +634,25 @@
#clock-cells = <1>;
clock-frequency = <11289600>;
+ /* Reference versaclock instead of audio_clk_a */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&versaclock6_bb 4>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
status = "okay";
ports {
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi
b/arch/arm/dts/beacon-renesom-som.dtsi
index d3fc8ffd5b4..68b04e56ae5 100644
--- a/arch/arm/dts/beacon-renesom-som.dtsi
+++ b/arch/arm/dts/beacon-renesom-som.dtsi
@@ -59,7 +59,7 @@
status = "okay";
phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id004d.d074",
+ compatible = "ethernet-phy-id0022.1640",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
diff --git a/arch/arm/dts/hihope-common.dtsi b/arch/arm/dts/hihope-common.dtsi
index b1eb6a08029..83104af2813 100644
--- a/arch/arm/dts/hihope-common.dtsi
+++ b/arch/arm/dts/hihope-common.dtsi
@@ -3,15 +3,26 @@
* Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
* HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &iic_pmic;
serial0 = &scif2;
serial1 = &hscif0;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
@@ -50,7 +61,7 @@
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -59,7 +70,7 @@
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -137,7 +148,7 @@
};
&gpio6 {
- usb1-reset {
+ usb1-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_LOW>;
output-low;
@@ -328,6 +339,8 @@
vqmmc-supply = <®_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
fixed-emmc-driver-type = <1>;
status = "okay";
diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
index 9ae67263c0d..24da6ee6ecc 100644
--- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
+++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
@@ -58,24 +58,3 @@
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
-
-/* Reference versaclock instead of audio_clk_a */
-&rcar_sound {
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&versaclock6_bb 4>, <&audio_clk_b>,
- <&audio_clk_c>,
- <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
-};
diff --git a/arch/arm/dts/r8a774a1-u-boot.dtsi
b/arch/arm/dts/r8a774a1-u-boot.dtsi
index cddffe87645..38f5bfe85fc 100644
--- a/arch/arm/dts/r8a774a1-u-boot.dtsi
+++ b/arch/arm/dts/r8a774a1-u-boot.dtsi
@@ -28,7 +28,6 @@
/delete-node/ &hdmi0;
/delete-node/ &lvds0;
/delete-node/ &rcar_sound;
-/delete-node/ &sdhi2;
/delete-node/ &sound_card;
/delete-node/ &vin0;
/delete-node/ &vin1;
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
index 7e643243c3b..9065dc24342 100644
--- a/arch/arm/dts/r8a774a1.dtsi
+++ b/arch/arm/dts/r8a774a1.dtsi
@@ -1678,7 +1678,7 @@
rcar_sound: sound@ec500000 {
/*
- * #sound-dai-cells is required
+ * #sound-dai-cells is required if simple-card
*
* Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
* Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
@@ -2359,8 +2359,8 @@
<0x02000000 0 0xfe200000 0 0xfe200000 0
0x00200000>,
<0x02000000 0 0x30000000 0 0x30000000 0
0x08000000>,
<0x42000000 0 0x38000000 0 0x38000000 0
0x08000000>;
- /* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0
0x80000000>;
+ /* Map all possible DDR/IOMMU as inbound ranges */
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1
0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -2371,6 +2371,8 @@
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 319>;
+ iommu-map = <0 &ipmmu_hc 0 1>;
+ iommu-map-mask = <0>;
status = "disabled";
};
@@ -2386,8 +2388,8 @@
<0x02000000 0 0xeea00000 0 0xeea00000 0
0x00200000>,
<0x02000000 0 0xc0000000 0 0xc0000000 0
0x08000000>,
<0x42000000 0 0xc8000000 0 0xc8000000 0
0x08000000>;
- /* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0
0x80000000>;
+ /* Map all possible DDR/IOMMU as inbound ranges */
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1
0x00000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
@@ -2398,6 +2400,8 @@
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 318>;
+ iommu-map = <0 &ipmmu_hc 1 1>;
+ iommu-map-mask = <0>;
status = "disabled";
};
--
2.40.1
