Current code expects bridge phy address at 0 which is not correct
expectation because bridge phy address is configurable.
That's why update the code to read reg property to figure it out
where bridge is and use it in phy creation code.
Signed-off-by: Michal Simek <michal.si...@amd.com>
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhum...@amd.com>
---
drivers/net/phy/phy.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index ae21acb059..d64a83b83d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -838,7 +838,10 @@ static struct phy_device *phy_connect_gmii2rgmii(struct
mii_dev *bus,
ofnode_for_each_subnode(node, dev_ofnode(dev)) {
node = ofnode_by_compatible(node, "xlnx,gmii-to-rgmii-1.0");
if (ofnode_valid(node)) {
- phydev = phy_device_create(bus, 0,
+ int gmiirgmii_phyaddr;
+
+ gmiirgmii_phyaddr = ofnode_read_u32_default(node,
"reg", 0);
+ phydev = phy_device_create(bus, gmiirgmii_phyaddr,
PHY_GMII2RGMII_ID, false);
if (phydev)
phydev->node = node;
--
2.27.0
