On 02/24/2011 11:37 AM, Kumar Gala wrote: > > On Feb 24, 2011, at 2:53 AM, Kumar Gala wrote: > >> From: Priyanka Jain <priyanka.j...@freescale.com> >> >> - Timeout counter value is set as DTOCV bits in SYSCTL register >> For counter value set as x, >> Timeout period = (2^(13+x))/SD_CLOCK >> >> - As per 4.6.2.2 section of SD Card specification v2.00, host should >> cofigure timeout period value to minimum 250 msec. >> >> - SD_CLOCK = mmc->trans_speed >> >> - Calculating x based on >> 250 msec = (2^(13+x))/mmc->trans_speed >> >> Signed-off-by: Priyanka Jain <priyanka.j...@freescale.com> >> Signed-off-by: Andy Fleming <aflem...@freescale.com> >> Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> >> --- >> drivers/mmc/fsl_esdhc.c | 5 ++++- >> 1 files changed, 4 insertions(+), 1 deletions(-) > > Stefano, > > Can you test this on iMX to make sure we didnt break anything there.
Yes, I will test it and I will send my tested-by if everything is ok. Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
