From: Jonathan Humphreys <j-humphr...@ti.com> Fix minor path and config macro name updates to sync with latest OpenOCD and U-Boot configurations.
Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD") Signed-off-by: Jonathan Humphreys <j-humphr...@ti.com> Signed-off-by: Nishanth Menon <n...@ti.com> --- Cc: Heinrich Schuchardt <heinrich.schucha...@canonical.com> doc/board/ti/k3.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst index 83fb0f121bb9..f9336b3a3622 100644 --- a/doc/board/ti/k3.rst +++ b/doc/board/ti/k3.rst @@ -601,7 +601,7 @@ correctly to ensure a sane system. $ cd openocd # Copy the udev rules to the correct system location $ sudo cp ./contrib/60-openocd.rules \ - ./src/JTAG/drivers/libjaylink/contrib/99-libjaylink.rules \ + ./src/jtag/drivers/libjaylink/contrib/99-libjaylink.rules \ /etc/udev/rules.d/ # Get Udev to load the new rules up $ sudo udevadm control --reload-rules @@ -792,7 +792,7 @@ Code modification In this example, we will debug ``board_init_f`` inside ``arch/arm/mach-k3/{soc}_init.c``. Since some sections of U-Boot will be executed multiple times during the bootup process of K3 - devices, we will need to include either ``CONFIG_CPU_ARM64`` or + devices, we will need to include either ``CONFIG_ARM64`` or ``CONFIG_CPU_V7R`` to catch the CPU at the desired place during the bootup process (Main or Wakeup domains). For example, modify the file as follows (depending on need): @@ -810,7 +810,7 @@ Code modification } ... /* Code to run on the ARMV8 (Main Domain) */ - if (IS_ENABLED(CONFIG_CPU_ARM64)) { + if (IS_ENABLED(CONFIG_ARM64)) { volatile int x = 1; while(x) {}; } -- 2.40.0