Hi Heiko, On Thu, Feb 24, 2011 at 3:33 PM, Heiko Schocher <h...@denx.de> wrote: > Albert ARIBAUD wrote: > The bin length is calculated in arch/arm/lib/board.c, but it seems > to me not correct ... :-( > > in board_init_f(): > > gd->mon_len = _bss_end_ofs; > > that seems correct to me, but later in board_init_r() > > monitor_flash_len = _bss_start_ofs; > > which is used for example in ./drivers/mtd/cfi_flash.c for protecting > the flash sectors ... so this should be fixed. > >> In the U-Boot image itself, knowing the image size could be achieved in >> ARM by using a general _end symbol that would be set after the last >> image output section, so _end-_start would equal the image size. > > we have such a "_end" in u-boot.lds files.
I guess we need a __dynsym_end in all u-boot.lds files. >> For code other than the U-Boot image itself (loaders, utilities), a 'du >> -b u-boot.bin | cut -f 1' should be ok, provided the image is built >> first, which I think is already the case. best regards, Po-Yu Chuang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
