Hi
thx for first look
> Gesendet: Dienstag, 08. August 2023 um 13:18 Uhr
> Von: "Eugen Hristev" <eugen.hris...@collabora.com>
> Hi Frank,
>
> On 8/8/23 11:09, Frank Wunderlich wrote:
> > From: Frank Wunderlich <fran...@public-files.de>
> >
> > Add Bananapi R2 Pro board.
> >
> > Signed-off-by: Frank Wunderlich <fran...@public-files.de>
> > ---
> > because iodomain is different to evb and now iodomain driver is sent as
> > patch we need to separate between EVB and R2Pro else board can be bricked.
> > ---
> > v2:
> > - drop switch-node for now as u-boot driver works differently to linux
> > ---
> > arch/arm/dts/Makefile | 3 +-
> > arch/arm/dts/rk3568-bpi-r2pro-u-boot.dtsi | 23 +
> > arch/arm/dts/rk3568-bpi-r2pro.dts | 549 ++++++++++++++++++++++
> > configs/bpi-r2pro-rk3568_defconfig | 101 ++++
> > 4 files changed, 675 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/dts/rk3568-bpi-r2pro-u-boot.dtsi
> > create mode 100644 arch/arm/dts/rk3568-bpi-r2pro.dts
> > create mode 100644 configs/bpi-r2pro-rk3568_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index bd518064f35f..767bf9db39fb 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -182,7 +182,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
> > rk3568-nanopi-r5s.dtb \
> > rk3568-odroid-m1.dtb \
> > rk3568-radxa-e25.dtb \
> > - rk3568-rock-3a.dtb
> > + rk3568-rock-3a.dtb \
> > + rk3568-bpi-r2pro.dtb
> >
> > dtb-$(CONFIG_ROCKCHIP_RK3588) += \
> > rk3588-edgeble-neu6a-io.dtb \
> > diff --git a/arch/arm/dts/rk3568-bpi-r2pro-u-boot.dtsi
> > b/arch/arm/dts/rk3568-bpi-r2pro-u-boot.dtsi
> > new file mode 100644
> > index 000000000000..382a52a28b10
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3568-bpi-r2pro-u-boot.dtsi
> > @@ -0,0 +1,23 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * (C) Copyright 2021 Rockchip Electronics Co., Ltd
> > + */
> > +
> > +#include "rk356x-u-boot.dtsi"
>
> Isn't rk356x-u-boot.dtsi automatically included if rk356x.dtsi is included ?
afaik this -u-boot file is for SPL and i need it to boot successful. This adds
nodes for DRAM and
MMC needed in first boot stage.
I based this file, dts and defconfig on the EVB.
> > +
> > +/ {
> > + chosen {
> > + stdout-path = &uart2;
> > + u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci;
> > + };
> > +};
> > +
> > +&sdmmc0 {
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + clock-frequency = <24000000>;
> > + bootph-pre-ram;
> > + status = "okay";
> > +};
> > diff --git a/arch/arm/dts/rk3568-bpi-r2pro.dts
> > b/arch/arm/dts/rk3568-bpi-r2pro.dts
> > new file mode 100644
> > index 000000000000..d99f29ab0bcb
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3568-bpi-r2pro.dts
> > @@ -0,0 +1,549 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Author: Frank Wunderlich <fran...@public-files.de>
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/leds/common.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include "rk3568.dtsi"
> ... as it's included here and rk3568.dtsi includes rk356x.dtsi
yes, but this DTS is used for second stage and not taken for SPL.
> > diff --git a/configs/bpi-r2pro-rk3568_defconfig
> > b/configs/bpi-r2pro-rk3568_defconfig
> > new file mode 100644
> > index 000000000000..e8936261eab3
> > --- /dev/null
> > +++ b/configs/bpi-r2pro-rk3568_defconfig
> > @@ -0,0 +1,101 @@
> > +CONFIG_ARM=y
> > +CONFIG_SKIP_LOWLEVEL_INIT=y
> > +CONFIG_COUNTER_FREQUENCY=24000000
> > +CONFIG_ARCH_ROCKCHIP=y
> > +CONFIG_TEXT_BASE=0x00a00000
> > +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_NR_DRAM_BANKS=2
> > +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> > +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
> > +CONFIG_DEFAULT_DEVICE_TREE="rk3568-bpi-r2pro"
> > +CONFIG_ROCKCHIP_RK3568=y
> > +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
> > +CONFIG_SPL_SERIAL=y
> > +CONFIG_SPL_STACK_R_ADDR=0x600000
> > +CONFIG_SPL_STACK=0x400000
> > +CONFIG_DEBUG_UART_BASE=0xFE660000
> > +CONFIG_DEBUG_UART_CLOCK=24000000
> > +CONFIG_SYS_LOAD_ADDR=0xc00800
> > +CONFIG_DEBUG_UART=y
> > +CONFIG_FIT=y
> > +CONFIG_FIT_VERBOSE=y
> > +CONFIG_SPL_FIT_SIGNATURE=y
> > +CONFIG_SPL_LOAD_FIT=y
> > +CONFIG_LEGACY_IMAGE_FORMAT=y
> > +#CONFIG_OF_SYSTEM_SETUP=y
> > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-bpi-r2pro"
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +CONFIG_SPL_MAX_SIZE=0x40000
> > +CONFIG_SPL_PAD_TO=0x7f8000
> > +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> > +CONFIG_SPL_BSS_START_ADDR=0x4000000
> > +CONFIG_SPL_BSS_MAX_SIZE=0x4000
> > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> > +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> > +CONFIG_SPL_STACK_R=y
> > +CONFIG_SPL_ATF=y
> > +CONFIG_CMD_GPIO=y
> > +CONFIG_CMD_GPT=y
> > +CONFIG_CMD_I2C=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_PMIC=y
> > +CONFIG_CMD_REGULATOR=y
> > +# CONFIG_SPL_DOS_PARTITION is not set
> > +CONFIG_SPL_OF_CONTROL=y
> > +CONFIG_OF_LIVE=y
> > +CONFIG_NET=n
> > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
> > interrupt-parent assigned-clocks assigned-clock-rates
> > assigned-clock-parents"
> > +CONFIG_SPL_REGMAP=y
> > +CONFIG_SPL_SYSCON=y
> > +CONFIG_SPL_CLK=y
> > +CONFIG_ROCKCHIP_GPIO=y
> > +CONFIG_ROCKCHIP_GPIO_V2=y
> > +CONFIG_SYS_I2C_ROCKCHIP=y
> > +CONFIG_MISC=y
> > +CONFIG_SUPPORT_EMMC_RPMB=y
> > +CONFIG_MMC_DW=y
> > +CONFIG_MMC_DW_ROCKCHIP=y
> > +CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_SDMA=y
> > +CONFIG_MMC_SDHCI_ROCKCHIP=y
> > +CONFIG_ETH_DESIGNWARE=y
> > +CONFIG_GMAC_ROCKCHIP=y
>
> I think you need the DWC_ETH_QOS here and base it on Jonas' rk3568 GMAC
> series
as said above the defconfig is based on EVB which i used till now, but with the
iodomain-patches from Jonas i need
different settings else hardware gets bricked. So to prevent users from
bricking their hardware i send this board-
specific defconfig/dts.
i have not yet verified network as it depends on iodomain, jonas' eth_qos
driver and maybe mediatek mt7531 driver
(which is currently bundled with mtk soc mac).
if needed i can drop the ethernet settings (and maybe the dt nodes) for now.
> Regards,
