On 12:08-20230804, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT > V1.0A module and subsequent V1.1 launch configuration SKUs. They are > strapped to boot from their on-module eMMC. U-Boot supports booting > from the on-module eMMC only, DFU support is disabled for now due to > missing AM62x USB support. > > The device trees were taken straight from Linux v6.5-rc1. > > Boot sequence is: > SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE > ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > ---
[...] > diff --git a/doc/board/toradex/verdin-am62.rst > b/doc/board/toradex/verdin-am62.rst > new file mode 100644 > index 00000000000..ac0e86b3001 > --- /dev/null > +++ b/doc/board/toradex/verdin-am62.rst > @@ -0,0 +1,130 @@ > +.. SPDX-License-Identifier: GPL-2.0-or-later > +.. sectionauthor:: Marcel Ziswiler <marcel.ziswi...@toradex.com> > + > +Verdin AM62 Module > +================== > + > +Quick Start > +----------- I'd leave a product link here: Something like `SoM <https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62>`_ `Dev board <https://www.toradex.com/products/carrier-board/verdin-development-board-kit>` or something like that. > +Output: > + > +.. code-block:: bash > + > +U-Boot SPL 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:14 +0200) > +SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)') > +SPL initial stack usage: 13368 bytes > +Trying to boot from MMC1 > +Authentication passed > +Authentication passed > +Authentication passed > +Authentication passed > +Authentication passed > +Starting ATF on ARM64 core... > + > +NOTICE: BL31: v2.9(release):v2.9.0-73-g463655cc8 > +NOTICE: BL31: Built : 14:51:42, Jun 5 2023 > +I/TC: > +I/TC: OP-TEE version: 3.21.0-168-g322cf9e33 (gcc version 12.2.1 20221205 > (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24))) #2 Mon Jun 5 13:04:15 UTC > 2023 aarch64 > +I/TC: WARNING: This OP-TEE configuration might be insecure! > +I/TC: WARNING: Please check > https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html > +I/TC: Primary CPU initializing > +I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)') > +I/TC: HUK Initialized > +I/TC: Primary CPU switching to normal world boot > + > +U-Boot SPL 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:41 +0200) > +SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)') > +SPL initial stack usage: 1840 bytes > +Trying to boot from MMC1 > +Authentication passed > +Authentication passed > + > + > +U-Boot 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:41 +0200) > + > +SoC: AM62X SR1.0 HS-FS > +DRAM: 2 GiB > +Core: 136 devices, 28 uclasses, devicetree: separate > +MMC: mmc@fa10000: 0, mmc@fa00000: 1 > +Loading Environment from MMC... OK > +In: serial@2800000 > +Out: serial@2800000 > +Err: serial@2800000 > +Model: Toradex 0076 Verdin AM62 Quad 2GB WB IT V1.0A > +Serial#: 15037380 > +Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333 > +am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: > 0x6BA81103 ale_ver: 0x00290105 Ports:2 mdio_freq:1000000 > +Setting variant to wifi > +Net: > +Warning: ethernet@8000000port@1 MAC addresses don't match: > +Address in ROM is 1c:63:49:22:5f:f9 > +Address in environment is 00:14:2d:e5:73:c4 > +eth0: ethernet@8000000port@1 [PRIME], eth1: ethernet@8000000port@2 > +Hit any key to stop autoboot: 0 > +Verdin AM62 # I think you missed adding white space here. It renders as this: https://usercontent.irccloud-cdn.com/file/625Dsdcq/image.png With that fixed, please feel free to add: Reviewed-by: Nishanth Menon <n...@ti.com> -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
