Hi Marcel
On 29/07/23 02:24, Marcel Ziswiler wrote:
From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.
Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
[...]
+ mbox-names = "rx", "tx", "notify";
+ ti,host-id = <35>;
+ ti,secure-host;
+};
diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
new file mode 100644
index 00000000000..e8c926f48b9
--- /dev/null
+++ b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include "k3-binman.dtsi"
+
+&binman {
+ custMpk {
+ filename = "custMpk.pem";
+ blob-ext {
+ filename = "../../ti/keys/custMpk.pem";
+ };
+ };
+
+ ti-degenerate-key {
+ filename = "ti-degenerate-key.pem";
+ blob-ext {
+ filename = "../../ti/keys/ti-degenerate-key.pem";
+ };
+ };
+};
+
+#ifndef CONFIG_ARM64
+
+&binman {
+ board-cfg {
+ filename = "board-cfg.bin";
+ bcfg_yaml: ti-board-config {
+ config = "board-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ pm-cfg {
+ filename = "pm-cfg.bin";
+ rcfg_yaml: ti-board-config {
+ config = "pm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ rm-cfg {
+ filename = "rm-cfg.bin";
+ pcfg_yaml: ti-board-config {
+ config = "rm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ sec-cfg {
+ filename = "sec-cfg.bin";
+ scfg_yaml: ti-board-config {
+ config = "sec-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ combined-tifs-cfg {
+ filename = "combined-tifs-cfg.bin";
+ ti-board-config {
+ bcfg_yaml_tifs: board-cfg {
+ config = "board-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ scfg_yaml_tifs: sec-cfg {
+ config = "sec-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ pcfg_yaml_tifs: pm-cfg {
+ config = "pm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ rcfg_yaml_tifs: rm-cfg {
+ config = "rm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ };
+ combined-dm-cfg {
+ filename = "combined-dm-cfg.bin";
+ ti-board-config {
+ pcfg_yaml_dm: pm-cfg {
+ config = "pm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ rcfg_yaml_dm: rm-cfg {
+ config = "rm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ };
+ combined-sysfw-cfg {
+ filename = "combined-sysfw-cfg.bin";
+ ti-board-config {
+ board-cfg {
+ config = "board-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ sec-cfg {
+ config = "sec-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ pm-cfg {
+ config = "pm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ rm-cfg {
+ config = "rm-cfg.yaml";
+ schema = "../../ti/common/schema.yaml";
+ };
+ };
+ };
+};
+
^ If you are already including k3-binman.dtsi, why are you redefining these?
+#endif /* CONFIG_ARM64 */
+
+#ifdef CONFIG_TARGET_VERDIN_AM62_R5
+
+&binman {
+ tiboot3-am62x-hs-verdin.bin {
+ filename = "tiboot3-am62x-hs-verdin.bin";
+ ti-secure-rom {
+ content = <&u_boot_spl>, <&ti_fs_enc>,
<&combined_tifs_cfg>,
+ <&combined_dm_cfg>, <&sysfw_inner_cert>;
+ combined;
+ dm-data;
+ sysfw-inner-cert;
+ keyfile = "custMpk.pem";
+ sw-rev = <1>;
+ content-sbl = <&u_boot_spl>;
+ content-sysfw = <&ti_fs_enc>;
+ content-sysfw-data = <&combined_tifs_cfg>;
+ content-sysfw-inner-cert = <&sysfw_inner_cert>;
+ content-dm-data = <&combined_dm_cfg>;
If the R5 builds are exactly the same as that generated by k3-am625-binman.dtsi,
would it make sense to include that file and just replace the filenames using
phandles?
+ conf-0 {
+ description =
"k3-am625-verdin-wifi-dev";
+ firmware = "uboot";
+ loadables = "uboot";
+ fdt = "fdt-0";
+ };
+ };
+ };
+ };
+};
+
+#endif /* CONFIG_TARGET_VERDIN_AM62_A53 */
diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
b/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
new file mode 100644
index 00000000000..5d564603eb2
--- /dev/null
+++ b/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
[...]
+ */
+
+#ifndef __VERDIN_AM62_H
+#define __VERDIN_AM62_H
+
+#define RAMDISK_ADDR_R 0x90300000
Nitpick: indentation
+#define SCRIPTADDR 0x90280000
+
+/* DDR Configuration */
+#define CFG_SYS_SDRAM_BASE 0x80000000
+#define CFG_SYS_SDRAM_BASE1 0x880000000
+#define CFG_SYS_SDRAM_SIZE SZ_2G /* Maximum supported size */
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x90200000\0" \
+ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "kernel_comp_addr_r=0x80200000\0" \
+ "kernel_comp_size=0x08000000\0" \
+ "ramdisk_addr_r=" __stringify(RAMDISK_ADDR_R) "\0" \
+ "scriptaddr=" __stringify(SCRIPTADDR) "\0"
+
+#if CONFIG_TARGET_VERDIN_AM62_A53
+/* Enable Distro Boot */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#else /* CONFIG_TARGET_VERDIN_AM62_A53 */
+#define BOOTENV \
+ ""
+#endif /* CONFIG_TARGET_VERDIN_AM62_A53 */
+
+/* Incorporate settings into the U-Boot environment */
+#define CFG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "boot_scripts=boot.scr\0" \
+ "boot_script_dhcp=boot.scr\0" \
+ "console=ttyS2\0" \
+ "fdt_board=dev\0" \
+ "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+ "consoleblank=0 earlycon=ns16550a,mmio32,0x02800000\0" \
+ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
+ "if test \"$confirm\" = \"y\"; then " \
+ "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
+ "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
+ "${blkcnt}; fi\0"
+
+#endif /* __VERDIN_AM62_H */
--
Thanking You
Neha Malcom Francis
