On 2023/8/3 19:08, Massimo Pegorer wrote:
Make device tree complete and consistent for pre relocation phase. Some
nodes are missing, causing warnings to be issued on serial port probing
during pre relocation phase (uclass_get_device_by_phandle_id fails when
called by pinctrl_select_state_full: none of these failures is fatal
nor causing issues). Add to *-u-boot.dtsi all required nodes with the
'bootph-some-ram' attribute.

Signed-off-by: Massimo Pegorer <massimo.pegorer+...@gmail.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
- Kever
---
  arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 27 +++++++++++++++++++++++
  1 file changed, 27 insertions(+)

diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi 
b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
index 61415559b7..d88dee8057 100644
--- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
@@ -13,3 +13,30 @@
  &uart0 {
        bootph-all;
  };
+
+&pinctrl {
+       bootph-some-ram;
+
+       uart0 {
+               bootph-some-ram;
+       };
+       rtc {
+               bootph-some-ram;
+       };
+};
+
+&uart0_xfer {
+       bootph-some-ram;
+};
+
+&uart0_cts {
+       bootph-some-ram;
+};
+
+&uart0_rts {
+       bootph-some-ram;
+};
+
+&rtc_32k {
+       bootph-some-ram;
+};

Reply via email to