Add DeviceTree files for Loongson-ls1c300 processor, currently only has below nodes.
- reset-controller - watchdog - serial - clock-controller tool for generate header and dts: [1] https://github.com/hodcarrier/ls1c300_bsp/tree/master/dts Signed-off-by: Du Huanpeng <d...@hodcarrier.org> --- arch/mips/Kconfig | 2 + arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/loongson/Makefile | 2 + .../dts/loongson/loongson32-ls1c300b.dtsi | 162 ++++++++++++++++++ arch/mips/boot/dts/loongson/ls1c300-eval.dts | 31 ++++ include/dt-bindings/clock/ls1c300-clk.h | 18 ++ include/dt-bindings/reset/ls1c300-reset.h | 33 ++++ 7 files changed, 249 insertions(+) create mode 100644 arch/mips/boot/dts/loongson/loongson32-ls1c300b.dtsi create mode 100644 arch/mips/boot/dts/loongson/ls1c300-eval.dts create mode 100644 include/dt-bindings/clock/ls1c300-clk.h create mode 100644 include/dt-bindings/reset/ls1c300-reset.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index fc6fba925aea..fbdd203a6fb5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -467,6 +467,8 @@ config LANTIQ config MACH_LOONGSON32 bool "Loongson 32-bit family of machines" select SYS_SUPPORTS_ZBOOT + select USE_OF + select BUILTIN_DTB help This enables support for the Loongson-1 family of machines. diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 928f38a79dff..2e040b1ba97b 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -6,6 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img subdir-$(CONFIG_MACH_INGENIC) += ingenic subdir-$(CONFIG_LANTIQ) += lantiq subdir-$(CONFIG_MACH_LOONGSON64) += loongson +subdir-$(CONFIG_MACH_LOONGSON32) += loongson subdir-$(CONFIG_SOC_VCOREIII) += mscc subdir-$(CONFIG_MIPS_MALTA) += mti subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile index 5c6433e441ee..f2a5ab153f77 100644 --- a/arch/mips/boot/dts/loongson/Makefile +++ b/arch/mips/boot/dts/loongson/Makefile @@ -6,4 +6,6 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb +dtb-$(CONFIG_MACH_LOONGSON32) += ls1c300-eval.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/loongson/loongson32-ls1c300b.dtsi b/arch/mips/boot/dts/loongson/loongson32-ls1c300b.dtsi new file mode 100644 index 000000000000..cc894e8feeb8 --- /dev/null +++ b/arch/mips/boot/dts/loongson/loongson32-ls1c300b.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/ls1c300-clk.h> +#include <dt-bindings/reset/ls1c300-reset.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "loongson,ls1c300-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "loongson,gs232", "mips,mips4Kc"; + clocks = <&acc CLK_CPU_THROT>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + u-boot,dm-pre-reloc; + + xtal: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + acc: clock-controller@1fe78030 { + compatible = "loongson,ls1c300-clk"; + clocks = <&xtal>; + #clock-cells = <1>; + reg = <0x1fe78030 0x8>, <0x1fe7c010 0x4>; + u-boot,dm-pre-reloc; + }; + + uart0: serial@1fe40000 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe40000 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart1: serial@1fe44000 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe44000 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart2: serial@1fe48000 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe48000 0x100>; + reg-shift = <0>; + resets = <&shut_ctrl UART2_SHUT>; + reset-names = "uart2"; + status = "disabled"; + }; + + uart3: serial@1fe4c000 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c000 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart4: serial@1fe4c400 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c400 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart5: serial@1fe4c500 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c500 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart6: serial@1fe4c600 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c600 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart7: serial@1fe4c700 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c700 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart8: serial@1fe4c800 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c800 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart9: serial@1fe4c900 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4c900 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart10: serial@1fe4ca00 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4ca00 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + uart11: serial@1fe4cb00 { + compatible = "loongson,ls1c300-uart", "ns16550a"; + clocks = <&acc CLK_APB>; + reg = <0x1fe4cb00 0x100>; + reg-shift = <0>; + status = "disabled"; + }; + + wdt: watchdog@1fe5c060 { + compatible = "loongson,ls1c300-wdt"; + clocks = <&acc CLK_APB>; + reg = <0x1fe5c060 0x10>; + }; + + reset-controller { + compatible = "wdt-reboot"; + wdt = <&wdt>; + }; + + shut_ctrl: reset-controller@1fd00420 { + compatible = "loongson,shut_ctrl"; + reg = <0x1fd00420 0x4>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/mips/boot/dts/loongson/ls1c300-eval.dts b/arch/mips/boot/dts/loongson/ls1c300-eval.dts new file mode 100644 index 000000000000..eaf65b2d966f --- /dev/null +++ b/arch/mips/boot/dts/loongson/ls1c300-eval.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +/dts-v1/; + +#include "loongson32-ls1c300b.dtsi" + +/ { + compatible = "lsmips,ls1c300-soc"; + model = "ls1c300-eval"; + + aliases { + serial0 = &uart2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart2 { + status = "okay"; +}; + diff --git a/include/dt-bindings/clock/ls1c300-clk.h b/include/dt-bindings/clock/ls1c300-clk.h new file mode 100644 index 000000000000..66798f40c7d0 --- /dev/null +++ b/include/dt-bindings/clock/ls1c300-clk.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#ifndef __DT_BINDINGS_LS1C300_CLK_H__ +#define __DT_BINDINGS_LS1C300_CLK_H__ + +#define CLK_XTAL 0 +#define CLK_PLL 1 +#define CLK_CPU 2 +#define CLK_APB 3 +#define CLK_CAMERA 4 +#define CLK_PIX 5 +#define CLK_AXIMUX 6 +#define CLK_CPU_THROT 7 + +#endif /* __DT_BINDINGS_LS1C300_CLK_H__ */ diff --git a/include/dt-bindings/reset/ls1c300-reset.h b/include/dt-bindings/reset/ls1c300-reset.h new file mode 100644 index 000000000000..d03db712476c --- /dev/null +++ b/include/dt-bindings/reset/ls1c300-reset.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _DT_BINDINGS_RESET_LS1C300_H +#define _DT_BINDINGS_RESET_LS1C300_H + +#define ADC_SHUT 25 +#define SDIO_SHUT 24 +#define DMA2_SHUT 23 +#define DMA1_SHUT 22 +#define DMA0_SHUT 21 +#define SPI1_SHUT 20 +#define SPI0_SHUT 19 +#define I2C2_SHUT 18 +#define I2C1_SHUT 17 +#define I2C0_SHUT 16 +#define AC97_SHUT 15 +#define I2S_SHUT 14 +#define UART3_SHUT 13 +#define UART2_SHUT 12 +#define UART1_SHUT 11 +#define UART0_SHUT 10 +#define CAN1_SHUT 9 +#define CAN0_SHUT 8 +#define ECC_SHUT 7 +#define MAC_SHUT 6 +#define USBHOST_SHUT 5 +#define USBOTG_SHUT 4 +#define SDRAM_SHUT 3 +#define SRAM_SHUT 2 +#define CAM_SHUT 1 +#define LCD_SHUT 0 + +#endif /* _DT_BINDINGS_RESET_LS1C300_H */ -- 2.34.1
